To repair small holes, start by cleaning the area and removing loose debris.

1. Apply a spackling or plaster filler using a putty knife, spreading it slightly beyond the hole for a smooth finish.
2. Let it dry as directed—some fillers change color to indicate dryness.
3. Once fully dry, lightly sand the patched area to blend it with the wall.
4. Wipe away any dust and you’re ready to paint.

Tip: Always check the filler’s packaging for drying times and recommended prep steps for best results.

Plaster is typically used for larger wall repairs or smoothing surfaces, while spackling is ideal for filling small cracks and nail holes.

• Plaster often requires mixing and can cover bigger areas.
• Spackling is usually premixed and easier for quick, minor fixes.

Both are handy for interior wall repair, so your choice depends on the size and scope of your project.

It’s best to wait until the plaster or spackling is completely dry before painting. Dry times vary, so check the package instructions—some products feature a color indicator that helps you know when it’s ready.

• If you paint too soon, you may see bubbles or uneven color.
• Light sanding after drying creates a smoother finish.

Patience pays off; waiting ensures your paint goes on smoothly.

Start by cleaning the wall surface with a damp cloth to remove dust and debris.

• Scrape away any loose paint or old filler.
• For better adhesion, rough up glossy surfaces lightly with sandpaper.
• If needed, apply a bonding primer or weld product as recommended on the packaging.

Proper prep helps the plaster stick and last longer.

When mixing plaster, work in a well-ventilated area and avoid creating dust clouds.

1. Add powder to water gradually, stirring gently to get a smooth consistency.
2. Wear protective gear, like a mask and gloves, to keep dust away from your skin and lungs.
3. Don’t use bare hands to mix, and always follow the manufacturer’s instructions for ratios.

Reminder: Careful mixing prevents lumps and helps your repair go smoothly.