There are several ways to add a protective buffer without a full remodel. Consider layering solutions in high-traffic spots like hallways, kitchens, and entryways.

• Vinyl or rubber wall base: Flexible, peel-and-stick or glue-applied strips help absorb bumps and hide gaps.
• Corner guards: Clear, metal, or foam guards shield outside corners where dings happen most.
• Kick plates/toe protection: Along doors or cabinet bases to resist scrapes from shoes and cleaning tools.
• Seal gaps: Use trim or caulk strips to reduce water intrusion that can lead to peeling paint.
• Care: Wipe with mild soap and a soft cloth; add felt pads to furniture.

Peel-and-stick options can be quick to install, while screw-mounted guards offer more impact resistance. Results can vary based on surface and usage.

Combining durable barriers with behavior management can help reduce damage. Focus on covering tempting edges and creating smooth, chew-resistant surfaces.

• Cover edges: Install metal or hard-plastic corner guards on outside corners; add flexible vinyl or rubber wall base to remove exposed wood edges.
• Smooth transitions: Use inside/outside corner blocks so there are no raised seams that attract chewing.
• Secure adhesion: Clean surfaces, press firmly, and follow product directions; add fasteners only if the item is designed for it.
• Manage access: Pet gates and supervised time can complement physical guards.
• Redirect: Provide appropriate chew toys and enrichment to shift attention.

Every dog is different, so results may vary. A professional trainer can offer behavior-specific guidance if chewing persists.

The “7% rule” is a casual design guideline, not a code. It suggests choosing baseboard height around 7% of your ceiling height to keep proportions balanced.

• Example: For 8-foot ceilings, many people consider roughly 5–7 inches; smaller rooms may look better with 2–4 inches.
• Material options: Peel-and-stick vinyl or rubber bases commonly come in heights around 2–6 inches; choose what aligns with door casings and trim style.
• Visual weight: Corner guards and profiles can add presence without increasing height.

Treat this as a starting point. Architecture, furniture scale, and personal preference matter more. Ordering a little extra length helps account for cuts and corners.

Rabbits often target low, accessible edges. The goal is a smooth, continuous barrier that’s harder to grip.

• Install guards: Use metal corner guards and skirting protectors on exposed corners and wall ends.
• Cover runs: Apply vinyl or rubber base along walls so raw wood and paint edges aren’t exposed.
• Reinforce seams: Add inside/outside corner blocks and end caps to remove lifted edges that invite nibbling.
• Limit access: Use pens or room dividers to keep curious chewers away from vulnerable areas.
• Check regularly: Replace damaged strips promptly to keep a continuous shield.

Every pet’s behavior is different. Pairing physical barriers with enrichment and supervised time can improve results.

Most peel-and-stick trims are DIY-friendly, but surfaces and conditions can affect adhesion. Work slowly for a clean finish.

1. Prep the wall: Clean, dry, and smooth the surface. Mark a level line for reference.
2. Measure and cut: Dry-fit lengths. Cut with a utility knife or snips. Warming the trim slightly can improve flexibility.
3. Apply gradually: Start in a corner. Peel backing a little at a time and press from top to bottom. Use a roller for firm contact.
4. Finish corners: Use matching inside/outside corner covers or carefully miter cuts.
5. Let it set: Avoid moisture and heavy contact for about 24 hours so adhesive bonds.

For bathrooms or kitchens, consider waterproof vinyl or rubber bases and follow the product’s instructions for best results.