This turn signal switch is really nice, works great in my jeep, one thing to know is you do still need to purchase a turn signal relay since this is only the witch. Overall Im really happy.

I installed the less-expensive version before, it wasn't nearly as easy to install and it eventually broke internally. THIS one however is the complete opposite and it's the perfect piece to use in my 1956 Willys SW!Installation was a snap as the wires are color-coded correctly, the overall feel and engagement of the turn-signal lever is solid and it perfectly suits my needs.

Great unit. Seems many of us want to use LED bulbs or are using newer flasher units. So if you use a newer three prong flasher from parts store, that has 31, 49, 49a, here is how you wire it. I used Novita EP35 which is LED bulb compatible. No need for resistors. 31 goes to chassis ground 49 goes to battery with inline fuse 49a goes to the black wire from this unit blue from unit is not used All signal lights worked as does hazard way flasher. I hope Speedway considers adding this info to the wiring diagram.

I installed one of these units and it quit working properly after a few months. I have always received quality parts and great service from Speedway and said so in my not so great review of this part. Here's where the incredible Speedway service comes in. Within a week, a new part arrived at my house. I didn't request it and of course, it was at no charge. I'm pleased to report that the new unit works great. When I opened the old one, there wasn't really anything broken - it just looked like it was not assembled just right. Great job, Speedway!

Good price and easy to install. Some negatives: Indicator light doesn't illuminate when used on a 6v + ground system even after changing the bulb. Not self canceling. (some old ones like this style were.) Flasher & flasher wiring connector not included.

Supplied mounting clamp to small, the unit is pretty large and when you turn the blinker from on to off the actual light stops like it should but for some reason you still hear the ticking sound of the blinker as if its still on. after about 5-7 seconds it goes away.

I originally gave a good review on this unit but after installing it I found the indicator light would not go out on the unit even with the ignition off. Contacted Speedway and after a few questions it was determined the unit was faulty. I was forwarded to another customer service person who told me to return the item for replacement. That's fine but to return it AT MY COST! That's not good customer relations.

This was purchased as a replacement for one that was only 2 months old and broke internally. This one requires extra care to ensure that lever is lifted a little bit extra to make right rear turn indicator work. Is anything better available as an add-on?

This thing is huge! I wanted a switch for my dune buggy,it was so big that it stuck out beyond the side of the buggy from the steering column. I have seen smaller shifters than this thing. It should be pictured next to something to reference the size, like the Empire State Building or something. IT'S HUGE!!!

First unit I got the Emergency flasher circuit didn't work. Company sent me a replacement and the second is the same. I wired it correctly both times and the problem appears to be the design of the emergency flasher circuit. Unit is not worth the money.