Kreg KMA2685 Rip-Cut

Great projects start with high-quality cuts, and you can make those cuts\xe2\x80\x94more easily than you ever imagined\xe2\x80\x94using your circular saw plus the Rip-Cut\xe2\x84\xa2 Circular Saw Edge Guide. The Kreg\xc2\xae Rip-Cut\xe2\x84\xa2 turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut\xe2\x84\xa2, you can cut with the confidence you want and the precision you need. The Rip-Cut\xe2\x84\xa2 easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut\xe2\x84\xa2 does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want\xe2\x80\x94up to 24"\xe2\x80\x94using the built-in measuring scale, and then make your cut. With a built-in measuring scale, you don\xe2\x80\x99t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you\'re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut\xe2\x84\xa2 makes it easier to cut down large sheets by yourself. The Rip-Cut\xe2\x84\xa2 is very easy to use. Simply mount your saw to the universal sled\xe2\x80\x94it accepts most left-blade or right-blade saws\xe2\x80\x94and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You\xe2\x80\x99ll get straight, accurate, repeatable cuts easily every time.