Start with your work surface height, then pick a seat that gives comfortable leg clearance and posture.

• Aim for clearance: Many people like about 10–12 inches between the seat and the benchtop for a relaxed elbow angle.
• Standard benches: If your bench is around 36 inches high, a seat roughly in the mid‑20s (inches) often feels comfortable.
• Adjustability helps: Look for a gas‑lift stool so you can fine‑tune height across different tasks.
• Taller setups: For higher benches or standing desks, drafting‑height stools with a foot ring can add support.
• Check specs: Review the item’s height range and dimensions on the product page to match your setup.

For a 30-inch tabletop or counter, a seat that’s close to dining-chair height usually feels right.

• Common range: Many shoppers choose around 18–20 inches in seat height for a 30-inch surface.
• Comfort gap: Try to maintain about 10–12 inches between the seat and the underside of the surface for legroom.
• Go adjustable: An adjustable stool (for example, roughly 17–22 inches) can adapt to different users and tasks.
• Measure first: If your counter has an apron or drawers, measure underside clearance to avoid knee bumps.
• Review details: Check the product’s height range in the listing before you buy.

Both options can work well; the right choice depends on your floor and how you like to move while working.

• Casters: Great for mobility on smooth floors. Look for locking casters for stability and softer wheels to help protect hard surfaces.
• Stationary feet: Offer steadier positioning, especially on uneven floors. Non‑marring caps can help protect flooring.
• Safety and control: If you reposition often, casters are convenient; if precision work or a sloped floor is common, stationary feet may feel more secure.
• Maintenance: Clear debris from wheels and check fasteners periodically.
• Specs check: Review the base type and any lock features on the item page.

PU (faux) leather is generally easy to maintain with simple, gentle care.

• Daily wipe: Use a soft cloth dampened with water to remove dust and light smudges.
• Spot clean: Mix mild soap with water, wipe the area, then use a clean damp cloth to remove residue. Dry with a towel.
• Avoid harsh chemicals: Skip bleach, acetone, or strong solvents, which may damage the finish.
• Bases and frames: Wipe metal or plastic parts with a damp cloth and dry thoroughly.
• Care info: Always check the product’s care instructions on the listing; materials can vary by model.

Weight capacities vary by design, so it’s best to confirm the exact rating on the product page before purchasing.

• Typical ranges: Many workshop stools list capacities around 250–330 lb; some heavy‑duty designs may be higher.
• Consider the whole stool: Capacity depends on the seat, frame, and casters (if included), not just one component.
• Use case: If you carry tools on a tray or lean while working, factor that into your choice.
• Safety: Avoid exceeding the listed rating and use on a level surface.
• Maintenance: Periodically check and tighten fasteners to help maintain performance over time.