You can lift a table with purpose-built furniture risers designed to fit under each leg.

1. Measure the legs: Note the leg shape (round/square) and width so the riser cup fits snugly.
2. Check capacity: Add up the table’s weight plus typical load and choose risers rated above that.
3. Pick a height: Many options are 2–12 inches, including stackable sets; use only as designed by the maker.
4. Set up on level flooring: Place risers first, then carefully lower each leg into the cups.
5. Test stability: Gently rock the table and add non-slip pads if needed. Avoid using with rolling casters unless specified as compatible.

These steps can help improve stability, but results may vary based on your table and flooring.

A table riser is a support block that sits under table legs to add height without changing the table itself. They’re commonly made of heavy-duty plastic or wood and come in square or round cups to match leg shapes.

• Height options: Fixed or stackable pieces in small increments (for example, 2, 3, 4, 5, 6, 8, or 12 inches).
• Stability features: Many include non-slip bottoms or textured cups to help reduce sliding.
• Use cases: Raising a table for standing tasks, creating clearance for storage, or aligning with counter-height surfaces.

Selection should be based on leg size, desired lift, floor type, and weight capacity.

It’s generally safer to use tested furniture risers since they’re designed with cups, non-slip bases, and posted weight ratings. If you’re considering a DIY approach for a light-duty display, proceed cautiously.

• Use a stable base: A single, flat platform that supports all legs can be less tippy than four separate blocks.
• Material matters: Solid, defect-free wood and high-friction pads can help reduce movement.
• Mind the height: Smaller lifts are typically easier to stabilize than tall stacks.
• Test gradually: Add weight slowly and check for wobble before regular use.

For everyday furniture, purpose-built risers available at retailers can offer a more predictable fit and capacity.

If you’d rather not use furniture risers, there are other ways to add height depending on your table and needs.

• Adjustable-height tables/desks: Some models let you raise the work surface without add-ons.
• Longer legs or leg kits: If the manufacturer offers compatible replacements, this can provide a cleaner look.
• Leveling feet/glides: Small-height adjustments may be possible with threaded feet or glides.
• Locking casters: Can add a bit of height and mobility, but may affect stability; use only if designed for your table.
• Platform bases: A sturdy, weight-rated platform can lift display tables as a single unit.

Always review the table’s instructions and weight limits before making changes.

Choosing the right furniture risers starts with fit and function.

1. Measure the legs: Match the cup shape (round/square) and internal size to your table’s feet so they sit securely.
2. Define your goal height: Decide how much lift you need (for example, a small 2–3 inch bump or a larger 5–8+ inch change for counter-height tasks).
3. Verify capacity: Select risers rated above the combined weight of the table and what you place on it.
4. Consider flooring: Non-slip or rubberized bottoms can help on hard floors; felt pads may be useful on delicate surfaces.
5. Plan for stability: Taller lifts can feel less stable; choose lower increments or stack only as the product allows.