If you don’t want four individual table legs, there are other stable options you can use for a tabletop.

• Metal table frames/bases: Modular desk bases (some with suction cups) can support wood, glass, or stone tops and offer a clean, modern look.
• Paired steel legs: Trapezoid or square box-section sets (sold in twos) create a trestle-style base with fewer attachment points.
• Industrial pipe bases: Pipe-style supports add an industrial feel and can be configured as a continuous base.
• Folding/adjustable supports: Foldable or height-adjustable table legs work for temporary setups or uneven floors.

Check width, height range, and load ratings to match your top and intended use.

You can shop wooden table legs on Walmart’s Table Legs category online. Look for “furniture legs” to find popular options for sofas, cabinets, and coffee tables.

• Materials & finish: Options include unfinished oak you can stain/paint, as well as prefinished brown tones.
• Heights: Common sizes on the page include 3 in., 4 in., 6 in., and 8 in. for replacement feet.
• Mounting style: Check whether they include pre-installed bolts, top plates, or screws.
• Floor protection: Consider felt pads or rubber protectors to reduce scuffs.

Filter by material and height to narrow choices, and confirm the hardware style matches your furniture.

If you’re building a DIY table, there are a few approachable paths.

• Use ready-made legs: Attaching hairpin legs, trapezoid legs, or adjustable desk legs to a wood top is a quick DIY route. Many include screws or mounting plates.
• Build wood legs: Select straight, sturdy lumber, cut to length, sand, and seal. Use appropriate mounting plates and pre-drill to reduce splitting.
• Stability: Match leg strength to your tabletop and consider cross-bracing for larger tops.
• Floor leveling: Adjustable feet or rubber protectors can help on uneven floors.

Always follow tool instructions and product guidelines. For heavy materials like glass or stone, consider frames designed for those tops.

You’ll see a few common terms on our Table Legs page:

• Hairpin legs: Slim, mid-century style rods (often 2- or 3-rod designs).
• Trapezoid legs: Geometric, angled steel supports used in pairs.
• Square/box-section legs: Heavier-duty rectangular bases for dining or desks.
• Industrial pipe legs: Pipe-style supports for a rugged, industrial look.
• Adjustable desk legs: Height-adjustable metal legs with foot caps for leveling.
• Folding legs: Hinged legs for portable or stowable tables.
• Furniture legs/feet: Short wood or plastic feet for sofas, cabinets, and small tables.

Names can vary by style and intended use.

Choose leg height based on your target finished table height and top thickness.

• Common options on the page: Around 16 in. for coffee tables; 28–30 in. for desks and dining tables.
• Adjustable choices: Some legs adjust roughly from the low 20s into the 30s, which can help with custom projects or uneven floors.
• Fit & finish: Add the tabletop thickness to the leg height to estimate overall height.
• Leveling: Legs with adjustable foot caps can fine-tune height by small increments.

Confirm dimensions, load ratings, and compatibility with your tabletop before installing.