Stacking limits can vary by model and design. A few tips can help you decide:

• Check the item page: Look for stacking guidance, weight limits, and whether the unit is designed to interlock.
• Use identical units: Stacking pieces from the same collection usually aligns feet, tops, and hardware better.
• Add anti-tip hardware: Many listings include anti-tip kits; anchoring to the wall can improve stability.
• Heavier on bottom: Place the heaviest units and items lower to lower the center of gravity.
• Level surface: Stack on a firm, level floor; avoid wobbly or uneven spots.

When in doubt, follow the manufacturer’s guidance on the product page, as safe stack counts depend on materials and construction.

Start by measuring your space so you pick drawers that actually fit and function well:

1. Measure width, depth, and height: Note baseboards, door tracks, and any low shelves that reduce usable space.
2. Plan for door clearance: Choose a depth that allows doors to close and drawers to open comfortably.
3. Go vertical: Tall, narrow units maximize storage without eating floor space.
4. Check dimensions on the item page: Compare your measurements with each unit’s listed size to avoid surprises.
5. Consider contents: Shallow drawers suit accessories; deeper drawers suit sweaters or linens.

If you’ll stack, map out total height before buying and consider anchoring for stability.

It’s possible, but compatibility isn’t guaranteed across different collections. To keep things safe and tidy:

• Match footprints: Ensure tops and bases have the same width and depth for stable contact.
• Check interlocking features: Some units rely on specific grooves or hardware that only align with the same model.
• Review weight limits: Don’t place a heavier unit on a lighter, smaller base.
• Use anti-tip hardware: Anchoring is recommended when stacking non-matching pieces.
• Test stability: After placing, gently push from different sides to check for wobble.

The product page usually lists whether units are designed to stack and if mixing is advised.

Anchoring methods can vary, so follow the included instructions first. General steps often look like this:

1. Locate a secure spot: Place the unit on a level surface and find a wall stud if possible.
2. Install the bracket: Attach the supplied bracket/strap to the furniture and then to the wall, using suitable hardware for your wall type.
3. Adjust and tighten: Leave the strap snug, not overly tight, so the unit remains firmly upright.
4. Final checks: Ensure all drawers open smoothly and the unit doesn’t shift.
5. Load smart: Keep heavier items in lower drawers to reduce tipping risk.

If hardware isn’t included, check the item page for recommended kits compatible with that model.

A little routine care can help keep your drawers looking neat:

• Dust regularly: Use a dry microfiber cloth; for smudges, a lightly damp cloth with mild soap can help.
• Dry immediately: Wipe up moisture right away to avoid swelling or damage, especially on veneer edges.
• Avoid harsh cleaners: Skip abrasives, bleach, or ammonia that may dull finishes.
• Protect the top: Use coasters or felt pads under decor to prevent scratches.
• Mind the hardware: Clean slides and pulls with a dry or slightly damp cloth; check the manufacturer’s guidance before lubricating slides.

For fabric drawer bins or metal frames on hybrid units, vacuum or wipe gently as recommended on the product page.