The PS5 uses a 2‑prong IEC C7 “figure‑8” power cord (non‑polarized). This is a common two‑slot cable used on many consoles and electronics, so replacements are widely available.

• Connector type: IEC C7 (figure‑8), two-slot, non‑polarized.
• Length: Choose a length that reaches your outlet without stretching; many people prefer 5–10 ft.
• Rating: Select a cord rated for standard household voltage and current in your region.
• Fit and condition: Ensure the plug seats securely and avoid using frayed or damaged cords.

Using the correct connector style can help maintain a safe, reliable setup. If you’re replacing a lost cord, compare the plug shape on your console to the cable’s end before purchasing.

For 4K gaming at up to 120Hz and next‑gen features, look for a certified Ultra High Speed HDMI cable (often associated with HDMI 2.1 and 48Gbps). This type of cable can support features your TV may offer, such as HDR, VRR, and eARC.

• Full features (4K/120, 8K, VRR): Ultra High Speed HDMI.
• Standard use (4K/60, 1080p): High Speed HDMI may be sufficient.
• Length matters: Shorter runs are generally more reliable at higher bandwidths; for long distances, consider active or specialty HDMI solutions.
• Device compatibility: Your TV and console settings also need to support these modes.

Choosing the right cable can help you get the most from your setup, but results may vary based on your display and configuration.

PS5 controllers charge and connect via USB‑C. You can use either USB‑A to USB‑C or USB‑C to USB‑C cables, depending on the port you’re plugging into (console, charger, or dock).

• Data capable: Choose a cable that supports both power and data for reliable charging, pairing, and updates.
• Build and length: A sturdy cable with reinforced ends helps reduce wear; 6–10 ft offers flexibility if you play while charging.
• Charging sources: Console USB ports or a compatible USB wall charger both work; charging speeds can vary by adapter and cable.
• Avoid charge‑only: Some cables carry power but not data, which may limit functionality.

Using a quality, data‑capable cable can help maintain a consistent connection during charging and wired play.

You’ve got a few flexible options to charge PS5 controllers through their USB‑C port.

• Console USB ports: Plug a USB‑A‑to‑C or USB‑C‑to‑C cable into the PS5’s USB ports for convenient charging while you play or when idle.
• Wall or desktop chargers: Use a compatible USB power adapter with a USB‑C cable for off‑console charging.
• Charging docks: Controller docks offer a tidy, ready‑to‑go setup on your shelf or desk.
• Cable care: Insert and remove by the plug (not the wire), avoid sharp bends, and keep connectors clean and dry.

Any of these methods can work well; choosing a stable cable and a suitable power source can help keep your controllers ready to go.

The PS5 outputs video over HDMI, but you do have adapter options when your display lacks HDMI.

• DVI monitors: An HDMI‑to‑DVI cable can carry video to DVI inputs. DVI doesn’t carry audio, so you may need a separate audio solution.
• USB‑C displays: Some USB‑C monitors accept video over USB‑C; look for a unidirectional HDMI (source) to USB‑C (display) adapter/cable and confirm your monitor supports video on its USB‑C port.
• Feature support: Adapters may limit features like HDR, VRR, or high refresh rates.
• Settings: You may need to select the correct input and use resolutions/refresh rates your display supports.

Checking the adapter’s direction, your monitor’s input capabilities, and supported formats can help you find a compatible path.