Most standard versions of this console use an IEC C7, often called a “figure‑8,” AC power cord. A higher‑performance version uses an IEC C13, the larger three‑slot style found on many desktop electronics. The easiest way to confirm is to check the shape of the power port on the back:

• Figure‑8 port: Choose an IEC C7 cord.
• Three‑slot port: Choose an IEC C13 cord.

Pick a length that fits your setup, and look for safety certifications from recognized testing labs. Avoid damaged or overly thin cords, and don’t force a connector that doesn’t match your device’s port.

Compatibility depends on the power port shape each model uses. Many newer consoles use an IEC C7 (“figure‑8”) cord, while some higher‑power variants use an IEC C13 (three‑slot) cord. To decide what’s interchangeable:

• Match the connector: Compare the plug to your device’s power port.
• Check ratings: Ensure the cord’s amperage and certifications suit your device.
• Wall plug type: Pick a cord that matches your region’s outlet style.

It’s best not to swap cords blindly. If the shapes differ, the cord won’t fit properly. When in doubt, reference your device’s manual or the markings near the power port.

Often, yes—if your device’s power port is the IEC C7 (“figure‑8”) style and the cord meets appropriate electrical ratings for your setup. For a safer pick:

• Confirm the connector: The port should have two rounded openings resembling a figure‑8.
• Check certification: Look for UL/ETL or similar safety marks.
• Gauge and length: Choose a cord with a suitable wire gauge (commonly 18 AWG) and a length that avoids tension.
• Region fit: Ensure the wall plug matches your local outlets.

Avoid worn or unverified cords and never force a connector. If anything feels loose or hot during use, unplug and reassess.

The power port is on the back of the console. Look for one of two shapes:

• Figure‑8 (two rounded openings): That takes an IEC C7 cord.
• Three‑slot rectangular port: That takes an IEC C13 cord.

To connect it safely:

1. Power off the device before plugging in.
2. Align the connector with the port; don’t force it.
3. Seat the plug fully, then route the cord to avoid sharp bends.
4. Keep the area ventilated and clear of clutter.

If the port shape doesn’t match your cord, use the correct type to prevent a loose fit or damage.

Choose a cord by matching the connector to your device’s power port, then selecting quality and length that suit your setup:

• Connector type: IEC C7 for the figure‑8 port; IEC C13 for the three‑slot port.
• Safety marks: Look for UL/ETL or similar certifications.
• Wire gauge: 18 AWG is common; heavier gauges can support higher loads.
• Length and plug style: Pick a length that reaches comfortably; consider angled plugs for tight spaces.

You can find options online with flexible delivery or store pickup. Avoid damaged or unverified cords, and don’t use adapters that alter the connector shape.