It depends on the console version:

• Original ("fat") model: three-prong IEC C13 power cord.
• Slim and Super Slim: two-prong IEC C7 "figure-8" power cord.

To choose confidently, match the plug to the socket on the back of your system. Consider a length that fits your setup, look for safety certifications, and select an appropriate wire gauge (lower AWG numbers are thicker) for longer runs. Avoid forcing a plug that doesn’t seat easily, and replace any cable that shows frayed insulation, bent pins, or other wear to help maintain safe operation.

Here’s a simple checklist for getting set up:

• Power cable: IEC C13 (three-prong) or IEC C7 (figure-8), depending on the console’s AC inlet.
• HDMI cable: best all-in-one option for most modern TVs.
• Component (YPbPr) cable: for older HDTVs that don’t have HDMI.
• Composite AV cable: basic video/audio for legacy TVs; lowest picture quality.
• Optical (Toslink) audio cable: optional for connecting to a soundbar or receiver.

Match the cable to your TV’s available inputs, organize cords to avoid pinching or tripping hazards, and set your TV to the correct input. You can adjust video output in the console’s menu if the first picture doesn’t appear or the resolution isn’t what you expected.

It varies by model. Many newer consoles use a two-prong IEC C7 "figure-8" cord, which the slim and super-slim versions of this system also use. The first-generation version uses a three-prong IEC C13 cord instead.

• Rounded figure-8 inlet: choose IEC C7.
• Three-slot rectangular inlet: choose IEC C13.

Visually matching the console’s socket to the plug shape is a practical approach and can reduce confusion when sharing cords between devices. Choose a safety-certified cable with a suitable length, and avoid forcing any connector that doesn’t fit easily to help prevent damage.

Use a quick visual check:

1. Unplug the console and locate the AC socket on the back.
2. If you see two rounded slots side by side, you need an IEC C7 "figure-8" cord.
3. If you see a larger, three-slot rectangular socket, you need an IEC C13 cord.
4. Measure the distance to your outlet to choose a sensible length.

Pick a safety-certified power cable in good condition, avoid tight bends around furniture, and don’t force a plug that isn’t an exact match. If you’re unsure, a quick photo of the socket can help you compare plug shapes before purchasing.

For most TVs, HDMI offers the sharpest picture and carries both video and audio over one cable. If your TV doesn’t have HDMI, component (YPbPr) is a strong fallback that supports high-definition on many older sets. Composite AV (yellow/red/white) works with legacy TVs but provides standard-definition quality.

• Use the shortest cable that comfortably reaches to reduce clutter.
• For separate audio to a receiver, consider adding an optical (Toslink) cable.
• After connecting, select the correct TV input and adjust video settings as needed; overall picture quality can also depend on your TV and cable condition.