Availability can change by color, size, and your location. Here’s a quick way to check:

1. Search the product and open its item page.
2. Review the stock status near the add-to-cart area for delivery or pickup options.
3. Select your ZIP code to see local inventory and estimated delivery windows.
4. Turn on in-stock alerts (when offered) to get notified if it returns.

If the exact item isn’t in stock, you can browse similar pool coatings in the same category and filter by type (e.g., epoxy or acrylic), color, and finish. Product pages provide the most up-to-date status. Since inventory moves fast, checking back or setting alerts can help you snag the item when it’s available.

We’re a retailer, so the pool coatings listed here come from various manufacturers. If you want the specific maker of a product, the fastest way to confirm is to:

• Open the product page and scroll to the specifications or item details.
• Look for the manufacturer or brand field listed by the seller.
• Check documentation on the page (e.g., guides or safety data) for the manufacturer’s name and support contacts.

Because multiple coatings are available—like epoxy and acrylic formulas—the manufacturer can differ by item. If you need additional confirmation, use the product’s Q&A section to ask the seller directly before purchasing.

Cure time varies by formula and weather. In general:

• Two‑part epoxies usually require a longer cure window before water exposure.
• Acrylic coatings can dry faster but still need full cure time.
• Temperature and humidity affect drying—cool, damp conditions tend to slow things down.

For best results, follow the label’s guidance on recoat and refill timing, and allow extra time if conditions are less than ideal. Keep foot traffic off fresh coatings, ensure good ventilation, and avoid splashing water until fully cured. Planning a dry weather window can help, but the exact timeframe depends on the specific product and site conditions. When in doubt, refer to the manufacturer instructions on the product page.

Compatibility depends on the coating you choose. Some formulas are described for use on plaster, fiberglass, steel, or aluminum, and others mention concrete or gunite. Always check the product page to confirm surface compatibility for your specific pool.

• Plaster or concrete: Many options are suitable; surface preparation is key.
• Fiberglass: Look for coatings that explicitly state fiberglass use.
• Metal (steel or aluminum): Surfaces should be clean, rust‑free, and may require a compatible primer.

If you’re unsure of your existing surface or previous coating, a small inconspicuous test spot and a review of the product instructions can help reduce the risk of adhesion issues.

Proper prep is important for adhesion and finish quality. Many projects benefit from:

1. Cleaning and etching: Use a cleaner/etch solution to remove oils, chalking, and scale, then rinse thoroughly and let dry.
2. Surface repairs: Patch chips or cracks and smooth rough spots.
3. Priming when recommended: Some coatings call for an epoxy primer, especially on rough plaster or concrete, new gunite, fiberglass, or sandblasted surfaces.
4. Following label steps: Mix and apply exactly as directed, observing recoat windows.

Always read the product’s instructions for the specific prep and primer requirements for your surface. Wearing appropriate protective gear and working in a well‑ventilated area can help make the job safer and more consistent, but results may vary based on site conditions.