Clear adhesive draft tape can be a simple, low-profile way to reduce small air leaks around window and door frames.

• Best use: Smooth, clean, dry surfaces like painted trim, glass, or metal.
• Gap size: Works for hairline to small gaps; larger under-door gaps typically need an under-door sweep or a draft stopper.
• Install tips: Clean first, run tape in continuous lengths, and press firmly along the edge.
• Conditions: Very cold temps can reduce tack; applying at room temperature can help.
• Removal: May leave light residue that usually cleans up with gentle methods.

Results can vary by gap size and exposure. You’ll find clear window insulation tape and door draft tape in our Weatherstripping and Door Weatherproofing sections.

The right solution depends on where the air is coming from and how big the gap is.

• Bottom of the door: Use an under-door sweep or a double-sided draft stopper for bigger or uneven gaps.
• Sides/top of the door: Compressible weather stripping (foam, rubber, or silicone) helps seal frame gaps.
• Small, quick fixes: Clear sealing tape can help on frames, especially for seasonal use.
• Heavy exposure: Rubber or silicone seals tend to hold up better outdoors.
• Renters: Look for adhesive, removable options to avoid permanent changes.

Measure the gap first and choose a seal that compresses without making the door hard to close. You can browse a range of door draft stoppers and weather stripping in our Door Weatherproofing aisle.

Rubberized draft tape can be an effective, durable option for sealing medium-sized gaps on door and window frames.

• Strengths: Flexible, weather-resistant, and good for repeated door use when applied to clean, dry trim.
• Best fit: Frame gaps rather than large under-door spaces; pair with an under-door sweep for the bottom.
• Surface match: Adheres best to smooth finishes; textured or dusty surfaces may reduce hold.
• Install tips: Measure the gap, cut to length, and press firmly for continuous contact along the seal.
• Longevity: Performance varies with climate and traffic; periodic checks help maintain a good seal.

You’ll find rubber and silicone weather stripping options in our Weatherstripping category.

Start by measuring the gaps so you match the seal to your door or window.

1. Measure the gap: Close the door and use a ruler or slip a strip of paper to gauge thickness. Small gaps are often around 1/8–1/4 in; larger gaps can be 3/8–3/4 in.
2. Match width and thickness: Choose a strip that compresses to fill the space without forcing the door.
3. Choose material: Foam for small/irregular gaps, rubber or silicone for medium gaps and durability, brush sweeps for uneven floors.
4. Length check: Many rolls range from ~16 to 66 ft; verify you have enough.

Review product specs for dimensions and recommended gap ranges before adding to cart.

Removing door draft tape is usually straightforward with a gentle approach.

1. Peel slowly: Lift a corner and pull the tape back low and parallel to the surface.
2. Soften if needed: If adhesive feels stiff, slightly warm the area (low, indirect heat) to help release.
3. Use plastic tools: A plastic card or scraper can help lift edges without scratching.
4. Clean residue: Start with warm, soapy water on a soft cloth. If residue remains, follow the product’s removal guidance and spot-test any cleaner.
5. Be surface-aware: Go gently on painted or finished trim to avoid lifting the finish.

When shopping, look for door draft tape labeled as removable if you plan seasonal changes.