Installing Command utensil hooks is simple and doesn't require tools. Start by cleaning the wall surface with rubbing alcohol (avoid household cleaners). Peel off the adhesive backing and press the strip firmly onto the wall. Attach the hook to the strip, pressing for about 30 seconds. Wait at least one hour before hanging anything to let the adhesive set. Tip: Make sure the surface is dry and smooth for best results. These hooks are designed for damage-free hanging, making them ideal for renters or anyone wanting to avoid holes in their walls.

Command utensil hooks can be used in bathrooms, but it's important to check the product packaging for moisture resistance. Many Command hooks are suitable for humid environments, but surfaces should be dry during installation.

• Install on tile, glass, or painted walls.
• Avoid placing hooks where water will directly hit them.

Command hooks stick best to smooth, clean surfaces like painted walls, glass, tile, and finished wood.

• Avoid rough, textured, or porous surfaces (like brick or wallpaper).
• Clean surfaces with rubbing alcohol before applying the adhesive strip.

To remove Command hooks, gently hold the hook and pull the adhesive strip straight down, keeping it parallel to the wall.

1. Don't pull the strip out or away from the wall.
2. Stretching the strip slowly releases the adhesive.

Command utensil hooks are designed for lightweight items, typically holding up to 1 pound (about 0.45 kg) per hook.

• Check the packaging for exact weight limits.
• Don't exceed the recommended weight to keep your items secure.