It depends on the range’s total load and the manufacturer’s requirements. Many full‑size electric ranges specify a 40A or 50A, 240V dedicated circuit, while some lower‑wattage or compact electric units may list 30A. Gas ranges typically only need a standard 120V household circuit for ignition and controls.

• Check the specs: Look for “minimum circuit ampacity” or “recommended circuit.”
• Electric vs. gas: Electric ovens/cooktops often require 40–50A; gas usually uses 120V/15A.
• When in doubt: Consult the installation guide and a licensed electrician, and follow local codes. Product pages usually list electrical requirements in the details.

A quick check of your stove’s rating label and manual can help. You’re looking for the minimum circuit ampacity and voltage.

1. Find the rating tag: It’s often behind a drawer, inside the door frame, or on the back.
2. Match the circuit: Compare the stove’s required amperage and voltage to your breaker and outlet.
3. Cord and outlet type: Make sure the plug (3‑prong or 4‑prong) and wire gauge match your setup.
4. Safety first: If the stove calls for more than 30A, avoid using an undersized circuit. A licensed electrician can assess your panel and advise per local code.

For electric ranges, manufacturers commonly call for a dedicated 240V circuit at 40A or 50A, depending on total wattage and features. Induction and high‑output electric models often land in the 40–50A range as well. Gas ranges typically use a standard 120V circuit (often 15A) for ignition and controls.

• Always verify: Check the model’s installation guide for exact requirements.
• Dedicated circuit: Many manufacturers specify a dedicated breaker.
• Safety: Avoid upsizing a breaker without proper wiring. A licensed electrician can confirm the correct breaker and wire size to meet local code.

Many electric ranges ship without a power cord because homes vary between 3‑prong and 4‑prong outlets. This lets you select the correct cord for your setup.

• Check the listing: Some models note “no power cord included.”
• Choose the right cord: Match plug type and amperage to your outlet and the range’s requirements.
• Installation: A qualified installer can attach the cord, secure strain relief, and test connections per local code.
• Accessories: You can find range cords and installation kits in appliance parts and accessories. Delivery and install services may be available in your area.

Start by measuring your cutout and comparing it to the range’s published cutout and clearance requirements.

• Measure width, depth, height: Cabinet opening, counter height, and depth to the wall.
• Slide‑in vs. freestanding: Slide‑ins often need precise countertop overlap; freestanding models are more forgiving.
• Connections and clearances: Leave room for the outlet, gas line (if applicable), and ventilation clearances.
• Safety hardware: Plan space for the anti‑tip bracket.
• Before delivery: Review the product’s installation guide. If you’re unsure, professional installation can help ensure a proper fit and compliance with local codes.