Zeagle Ranger LTD Back Inflate BCD (X-Large, Black)

The Zeagle Ranger LTD shoulder is designed with the new super duty Airlock buckle that will swivel to adjust the harness to the body's contour to eliminate binding and restriction of movement at the chest and underarm areas. With the addition of harness type webbing and a new threading arrangement the diver can easily add more D-rings and other accessories conveniently on the shoulder. This feature will now allow the technical and accessory minded diver to further set-up his BC to what he needs for the type of diving he is doing. Zeagle has also added a right-hand shoulder dump with a pull knob located conveniently on the inside edge of the right shoulder pad. The dump valve acts also as an additional safety overpressure valve. The Zeagle Ranger LTD is equipped with Personal Fit System (PFS) Modular Sizing. The PFS allows for a custom fit and lets you change out specific sections of the BC. The Zeagle Ranger LTD also has adjustable elastic waist panels and a lumbar pad that is permanently mounted in the rear of the vest section. The BC is made from heavily reinforced 1050-denier ballistic nylon, has 2-zippered utility pockets, 4 stainless steel D-rings on the shoulders (two adjustable), 2 stainless steel D-rings on vest so there's plenty of storage space and accessory attachment points for all your gear. This back-inflation BC provides 44 lbs. (20 kg) of lift and comes equipped with Zeagle's Ripcord Weight System. The Ripcord System has a block of soft weight capacity of 30 lbs. (13.6 kg) of releasable weight and an additional capacity of 20 lbs. (9 kg) rear trim weight that is non-releasable. Adjusting the BC for a perfect fit the Ranger LTD has torso adjustable shoulders straps an adjustable sternum and waist straps all equipped with squeeze-style" side-release buckles for easy donning and doffing. The Ranger LTD can accommodate single or twin tanks with 11" (27.8cm) spaced grommets for the twin cylinder mounting. Buoyancy control and trim is easy with the 2-lower rear, right shoulder overpressure relief/pull dump valves and Bx Power Inflator Mechanism. The Bx Power Inflator makes preventative maintenance easy with its threaded lower mechanism that allows the attachment of a garden hose for fast and easy inner bladder rinsing. The Bx is also connected to a pull dump valve for rapid deflation. The BCD dry weight is 9.5 lbs. (4.3 kg) it is available in multiple sizes and comes with a low pressure quick disconnect hose with 3/8" threads. BCD is made in the USA.