Item Details:
*Working voltage: AC220V+-10%
*Maximum load: 10A relay, resistance load ≤8A, inductive load ≤3A
*Channel: 1ch
*Working frequency: 433MZH optional
*Working temperature: -10'C-+60'C
*Output status:
It is adjusted by the Jumper on the Receiver Board,
(before you change it .you need turn OFF the power. Until you have changed it,then turn ON the power again, or the State will not be changed)
A: Wait a moment ------- put the jumper on "M&G".
B: Shift----------- Put the jumper on "T&G".
C: Lock--------- Remove the jumper or place the jumper on any 1 pin.
Momentary ----------- Press the transmitter button A, the receiver relay A is turned on, the button A is released; the receiver relay A is turned off.
Toggle-----------Press the transmitter button A once, the receiver relay A is turned on, and then press the button A,
Receiver relay A is disconnected, locked ------- Press transmitter button A, receiver relay A is open, press transmitter button B, relay A is closed.
*Input AC220V for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully.
*Clearing code:
Press and hold the Learn button on the receiver until the LED is off, which means the code has been successfully cleared.
* Brand new and high quality
*Color: As Pictures Show
Package Contents:
1*Controller
2*Remote Controllers(with battery)
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
