For reloaders using RCBS Group C and Legacy Series dies, this steel decapping unit is a must-have component, designed for straight-walled rifle configurations, providing reliable and consistent performance every time you use it.
Made from high-quality steel materials this decapping unit ensures that your reloading process runs smoothly and accurately.
- RCBS Group C and Legacy Series dies
- High-quality steel materials
- Made in USA
Installation Instructions:
- Install the decap unit in the following manner:
Screw the decap unit into the die with 3/16" of the pin sticking out from the die. - With the decap unit hanging loose, lube a case and run it up into the size die.
- While the case is still in the size die, lock the nut down.
- Extract the case from the die and the die from the press. Check to see if the decap unit is centered by rotating the die in the large lock nut.
- If it is not centered, repeat the process, break the locknut loose, and size a case, turning the lock nut over before locking it down.
Compatibility
Can't find your cartridge, or not sure which decap unit or pin you need? Look it up here!
| .375 Winchester |
| .38-55 Winchester & Ballard |
| .40-65 Shiloh-Sharps 408" Bore |
| .40-70-2 1/2" Sharps Straight |
| .405 Winchester |
| .444 Marlin .45-70 U.S. Government |
| .45-60 Winchester |
| .45-70 U.S Government |
| .45-75 Winchester |
| .45-90-2.4" Sharps Straight |
| .45-100-2.6" Sharps Straight |
| .45-110-2 7/8" Sharps Straight |
| .45-120-3 1/4" Sharps Straight |
| .450 Marlin |
| .458 Lott |
| .458 Winchester Magnum |
| .50-70 U.S. Government |
| .50-90-2 1/2" Sharps Straight |
| .50-95 Winchester Express |
| .56-50 Spencer |
| .500 Jeffery |
| .500 Nitro Express |
| .505 Gibbs |