Printmaking Machine Print Making Machine Large Hand Printmaker with Stand

Introduction of Printmaking Machine:
Table size: 53 × 80cm
Machine size: 86*60*108cm (Inclusive base)
Face plate: The 12mm thick precision steel plate is adopted, and the surface is subjected to chrome plating treatment, so that the face plate has high strength and never rusts. No positioning clamping pieces are arranged on the upper surface of the whole face plate, so that the machine is more perfect to use.
Upper roller: high-strength steel pipe subjected to electroplating and mirror polishing
Lower roller: high strength steel pipe with blackened engraved patterns
Main structure: The core structure is integrally formed by a 25mm thick steel frame structure, so that the strength and the accuracy are improved. The rest of parts are made of high-strength steel plates, and the original appearance design is simple.

Note: One felt mat is included

Parameter:
Machine size: 80*53*41cm (31.5*21*16")
Table size: 53 × 80 cm(20.9*31.5")
Base size: 86*60*66 cm(34*24*26")
Roller size: 50*10cm(20*4")
Hand wheel diameter: 50cm(20") Machine weight: 140KG

Usage skills
1. Adjusting pressure: Before the printmaking machine is used, the pressure needs to be adjusted according to different printing materials and plate thicknesses. For example, when thin paper sheets are used, the pressure can be appropriately reduced to avoid the problem of excessive extrusion or distortion of printed matter.
2. Choosing appropriate printing materials: Before printing is conducted, it is necessary to select appropriate printing materials including plates, lubricants, ink, printing paper and so on. Selection of the appropriate materials can ensure that the printing effect is more ideal.
3. Keeping a stable printing state: When the printmaking machine is used, the stable printing state needs to be kept to avoid the problems of printed matter residues or printing repetition and so on. Before formal printing is carried out, trial printing can be conducted for several times, and formal printing begins after the printing position is determined.
4. Cleaning: After the printmaking machine is used, the machine needs to be cleaned timely to avoid the phenomenon that paint enters the machine to cause a machine failure. The cleaning method comprises the steps of firstly, wiping off residual ink or other paint, then thoroughly cleaning the machine with a cleaning solution or water, and finally using an air blower to dry the machine.
5. Maintenance: The printmaking machine needs to be regularly maintained to prolong the service life and ensure the printing quality. The maintenance method comprises the steps of regularly checking whether the machine parts are intact or not, applying protective oil, keeping the machine dry and clean and so on.

Item included(024272):
Techtongda Hand-cranked Print making machine