Graphene Ceramic Coating™
Graphene Ceramic Coating™
Hero image 0 of Graphene Ceramic Coating™, 0 of 9

Graphene Ceramic Coating™

|44 ratings
MaterialGlass Bottle
Size60 mL

Key item features

  • Advanced Formulation: The Graphene Ceramic Coating™ integrates Graphene Technology onto a ceramic backbone, providing superior protection against the elements with verified >10H hardness and over 7 years of durability.
  • Enhanced Protection: This coating offers improved resistance to water spotting, stains from bugs and droppings, and scratches during washing, while also increasing depth and clarity for an amazing gloss.
  • Broad Application: It is safely applicable to an extensive range of vehicle surfaces including painted areas, glass, headlights, chrome, trim, wheels, and bed liners.
  • Simplified Application: Designed for easier application than previous ceramic coatings, it facilitates efficient water evacuation with lower sliding angles and higher contact angles averaging 110-118°.
  • Innovative Visibility: Featuring Patent Pending UV Tracing Technology™, the coating emits a bluish hue under UV light, acting as a crucial aid for thorough application and inspection.
  • Complete Kit: The product package includes a 60ml Graphene Ceramic Coating bottle, Graphene Boost, Surface Prep, application towels, applicators, and gloves for a comprehensive setup.
Generated by AI

Specs

Brand, Adam's PolishesForm, WaxVehicle fitment type, UniversalManufacturer, Adam's PolishesRec. use, AutomotiveMaterial, Glass Bottle

About this item

Product details

This Product Cannot be Shipped via Air. Including Overnighted, 2-Day, Priority Mail, or International Methods.

With the inclusion of Graphene, Adam’sUV Ceramic Coating has evolved! Our Graphene Ceramic Coating™ has been verified to have >10H Hardness. Compared to the original Ceramic Coating, the Graphene variant will be found to have some improved characteristics:

  • >10H Hardness, 7+ Years of Protection
  • Less prone to water spotting
  • Higher stain resistance against bugs, saps, droppings, etc.
  • Higher scratch resistance during the washing process
  • Easier to apply than previous Ceramic Coatings
  • Increased depth and clarity to all surfaces
  • Lower sliding angle with waterevacuating at angles less than 10-15°
  • Higher contact angles averaging 110-118°
  • Patent Pending, UV Tracing Technology™
  • Free to apply toallPainted Surfaces, Glass, Headlights, Chrome, Trim, Wheels, and even Bed Liners!

Looking for more differences between Graphene Ceramic Coating™, and our Ceramic Coating? Click here to read the write up.

Why is Graphene still called a Ceramic Coating?

Graphene alonewill not form a coating. Period. Graphene is a flat non-reactive plane, it will not form a bond with other things.

Graphene coatings are coatings with graphene molecules grafted onto the ceramic backbone. If you think of the graphic of the graphene oxide, the tails you see sticking up are what is grafted onto the ceramic molecule. The Ceramic molecule bonds with the car, and the graphene portion of the molecule is on top, forming the surface of the coating.

In the kit you’ll find:

1- 60mlGraphene Ceramic Coating™ Bottle

1- 4ozGraphene Boost

1- 4oz Surface Prep

2-Single Soft Towels

2- Suede Removal Towels

2- Micro Silk Applicators

1- Pair of Gloves

Optional 1- UV Flashlight

Instructions for Paint & Glass:

  1. Prepare your painted surface or glass by using the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. For optimal results, users must Wash, Clay/Decontaminate, and Polish their paint prior to application.
  2. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam’s UV Flashlight for inspections. Take note of between the body lines, bumper areas, mirror caps, and commonly missed areas on your vehicle. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
  3. Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
  4. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Instructions for Plastic Trim & Headlights:

  1. Prepare your plastic trim or headlights by using the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated plastic trim or headlights, we recommend a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel.
  2. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. Since the product is being applied to a porous surface, you will not see a rainbow/ flashing effect - the immediate color change of the plastic or trim will reveal where the product has been applied. However, you are also able to utilize the Adam’s UV Flashlight for inspections where desired.
  3. Once the recently applied product has penetrated, begin leveling the coating, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
  4. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Instructions for Wheels:

  1. Prepare your wheels by using the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated wheels, we recommend a thorough cleaning with Adam’s Wheel Cleaner, or Eco Wheel Cleaner, in addition claying with a Fine Grade Clay Bar and Detail Spray may also be necessary to initially remove stubborn contaminations from the barrels and/or wheel faces.
  2. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam’s UV Flashlight for inspections. Take note of behind the spokes, in between the crevices of the wheel design, around the valve stem and center cap areas. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
  3. Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
  4. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Common Sense Warning:

Adam’s Graphene Ceramic Coating™ is a semi-permanent ceramic coating. If installed incorrectly, polishing may be needed. Avoid contact with eyes, nose, and ingestion – always keep away from children! If contact does occur, rinse thoroughly with water and monitor for irritation. If irritation persists, contact a physician.

View Adam's Polishes SDS


FAQ:

  1. “Can I layer this product to make it last longer?”

Yes, of course, but that doesn’t mean layering this product 10 times will make it 10x longer— any application after 3 rounds will render the product redundant and still provide the same hydrophobic effects.

  1. “What is Ceramic Glow Technology?”

Ceramic Glow Technology™ is Adam’s Polishes Patent-Pending chemistry. It’s a crystalline form of an optical brightener that absorbs energy and emits light as it relaxes back down to a lower energy state.

  1. “What’s the difference between fluorescence and phosphorescence?”

Length of time that the light is emitted. Said another way, the amount of time it takes for the electrons to relax and quit releasing energy in the form of photons or light.

  1. “Does the UV Coating act as a durability indicator?”

No, it doesn’t. It’s currently offered as an application aid and utility for visualizing the coating. Lack of glow does not indicate lack of coating.

  1. “Why does the product glow more intensely on some substrates than others?”

Differences in porosity and the ability of the coating to penetrate and bond to different surfaces will cause different levels of film thickness. The thicker the film, the more intense the glow typically.

  1. “Will my car glow blue in the sunlight?”

No, because this coating is completely invisible and clear under standard light, the coating will only glow a bluish hue under the 395 NM UV light.

  1. “Will this coating glow after being “charged” with the UV light?”

No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes-- these slowly become excited under any light and will diminish over the course of a few minutes.

  1. “What can I use this on? Can I just use this on the whole car?”

Adam’s Graphene Ceramic Coating™ provides protection to an extreme range of areas on your vehicle including Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components, Headlights, Bed liners, - all are safe to be protected.

  1. “What happens if I forget a spot or end up with a high-spot?”

If you forget a spot and you catch it in time (10-20 minutes after removal) simply reapply to that area and wipe off after 1-2 minutes. Reactivating the product will allow for easier removal. If left on for longer, we recommend Brilliant Glaze and a microfiber applicator, or machine polishing with Polish to fully remove the imperfection.

    • Superior Protection Against The Elements
    • Graphene Technology
    • Protects The Surface For Years
    • Provides Amazing Gloss & Shine
    info:
    We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

    Specifications

    Brand

    Adam's Polishes

    Form

    Wax

    Vehicle fitment type

    Universal

    Manufacturer

    Adam's Polishes

    Warranty

    Warranty information

    Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

    Customer ratings & reviews

    4.5 out of 5 stars
    stars
    44 ratings39 reviews
    Includes global ratings and reviews
    How item rating is calculated
    Filtered and sorted results would be available on the new 'Customer ratings & reviews' page.
    Sort by |

    Showing 1-3 of 39 reviews

    Oct 12, 2024
    Reviewer name: BlairF
    5 out of 5 stars
    5 out of 5 stars review

    Best Coating I have used!

    I have been detailing cars for over 30 years both as a hobby and a career. When I began researching different types of coatings the Adams line of products stood out to me. I tried the standard ceramic coating they offered as well as some other brands. I was very impressed with the results from the Adams product. As I continued to develop my craft with coating I decided to try Adams' Graphene coating. I have been very pleased with results. It gives a high-level amount of protection, amazing shine and depth and most of all it is simple to apply. I have used Adams; Graphene on over 50 vehicles and have had amazing results every time.

    Review from Adam's Polishes
    Helpful?2I1YIONC0751461204647
    Sep 9, 2024
    Reviewer name: CalvinS
    5 out of 5 stars
    5 out of 5 stars review

    Ceramic Coating Kits

    I have Ceramic Coated about 10 cars with Adams Polishes Ceramic Coating Kits. This product is very easy to apply, you just need to follow the directions. I always use a microfiber block to apply it as it makes applying go faster with less streaks.

    Review from Adam's Polishes
    Helpful?2I1YIONC0751461204647
    Aug 23, 2024
    Reviewer name: ChrisW
    5 out of 5 stars
    5 out of 5 stars review

    Great on my New Hell Cat

    MAKE SURE YOU USE IT ALL I HAD SOME LEFT OVER AND THOUGHT I WOULD WAIT A DAY BEFORE PUTTING IT ON STRIPES AND IT WAS SOLID NEXT DAY USE IT ALL. BOUGHT MORE TO DO MY OTHER CARS

    Review from Adam's Polishes
    Helpful?2I1YIONC0751461204647
    Current price is $103.69
    Price when purchased online
    • Free shipping
    • Free Holiday returns until Jan 31

    How do you want your item?

    How do you want your item?
    Ships to
    Arrives between Nov 24 - Nov 30
    |
    Sold and shipped by Adam's Polishes
    4.26530612244898 out of 5 stars
    4.3 stars out of 5, based on 49 seller reviews(4.3)
    Extended holiday returns
    Free Holiday returns until Jan 31