Dive Rite Dive Rite XT Advanced Open Water Regulator

The XT Advanced Open Water Regulator Package draws from Dive Rite's technical roots, for a regulator setup that any diver can appreciate. The XT Advanced Open Water Regulator Package consists of Dive Rite's XT1 High Performance First Stage, a matched set of XT2 Balanced Second Stages, & a Mini Tech 2" (5.1cm) SPG. Along with all of the main components, accessories such as clips & necklaces are included. With its optimal hose routing, there are no dangling hoses to get snagged on the dive. The primary second stage is routed under the diver's arm on a 40" (102cm) flex hose with an angled adapter. This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation. The backup second stage is on a 22" (56cm) flex hose with necklace to be quickly accessed if needed. The high-quality Mini Tech 2" (5.1cm) Brass SPG is on a 30" (76cm) flex hose with boot and stainless clip to be attached on the waist or chest D-ring for easy viewing. For transporting your XT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included. Available in Yoke or DIN.

The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT's advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today. The Dive Rite XT1 First-Stage Regulator with five-3/8" threaded low pressure ports gives divers ultimate flexibility in hose routing. This is especially beneficial to the back-mount technical diver where the need for a streamlined regulator configuration is required. It does not cause undue stress on the hoses. One of the 5 LP port is located on the top-of-the-turret and is designed with safety & convenience in mind. The port is slightly convex and slotted on each side to accommodate an 11/16" wrench for securing the turret while loosening the LP hose. This makes it easy-to-change the hose without concern of loosening the turret. The regulator comes equipped with 2 HP ports with 7/16" threads that are Angled-90-degrees from the DIN/Yoke fitting, which gives the perfect angle for hose routing.

Designed for the challenging world of technical diving, this regulator is pending certification to CE EN 250 and its approval for cold water 4,350 psi (300 bars) service, having passed the most rigorous of tests by Dive Rite. The balanced diaphragm, black chrome plated marine bass first stage regulator is inherently environmentally sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance.

With the XT1 there is a secondary environmental diaphragm membrane that seals off the spring chamber keeping the first stage completely sealed off from the environment adding a second layer of corrosion resistance and prevention of freezing in cold water use. A pneumatically balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure.

The second stage regulators have an ergonomic dive/pre-dive venturi lever that is easy-to-adjust even with thick gloves. The venturi lever prevents regulator free flow. Second stage uses a pneumatically balanced downstream valve, which provides better performance at depth.

The second stage has an external adjustment valve to fine-tune inhalation effort. The second stage housing and cover are manufactured from durable impact resistant ABS plastic with chromed brass adjustment knob and barrel tube. Black 2'nd stage cover is carbon fiber material.