C7 Corvette Underhood Emblem - Metal Crossed Flags Emblem

This is a photo of the C7 Cross-Flag emblem taken with a high end digital camera and with PhotoSTEEL technology it is transformed onto thin flat steel and sized to fit in the factory under hood crossed flag impression.



When you pop your hood on your C7 Corvette your LT1/LT4 engine will draw attention alone but this emblem on the inside of the hood completes the WOW factor!



GM was just as impressed as we were and granted it an official GM licensed product.



Kit includes the flat metal under hood emblem along with a dual installation kit which includes both epoxy and hardware mounting.



There is one small hole at each wing tip and at the bottom, these are needed during the production of the emblem and is also used with the hardware mounting kit. Please review the listing picture in full zoom as the hood emblem does not completely fill the factory under hood crossed flag impression but it does fit inside of it and lays flat.



We recommend using both of the included mounting kits when installing which does require the hood liner to be removed. If you op to just install using the epoxy installation, then the hood liner does not require to be removed.