1.5 HP Shallow Well Pump Garden Booster Jet Pump W/Controller 1200 GPH 115V Black

1.5 HP 115V Shallow Well Pump Garden Booster Jet Pump With Controller 1200 GPH

If you are looking for efficient and simple irrigation methods, take a look at our shallow well pump. Made of high-quality material, this pump provides quality assurance for your long-term use. Max 1100w power, 3420 rpm, and max.157.48ft lift make your work easier and more efficient. We believe it will be your assistant in agricultural production, breeding, or other work.

Specifications

Material: Cast Iron, Silicon Steel, Aluminum, Stainless Steel, and Plastic

Color: Black

Process: Painting and Polishing

Motor: Pure Copper Motor

Assembly Required: Yes

Mounting Type: Floor Standing

Plug Type: US Standard

Number of Pieces: 1

Type: JS-110

Controller Type: EPC-1

IP Level: IP44

Waterproof Lever: IPX4

Capacitance: 35μF

Controller Voltage: 220-240V, 50-60Hz

Controller Fuse: 10A

Max. Mpa: 1Mpa

Max Temperature: 60°C/140°F

Standard Voltage: 110V, 60Hz

Maximum Voltage: 115V

Input: 7.0A

Power: 1100W(1.5hp)

Rotating Speed: 3420rpm

Water Pump Inlet: 1in

Water Pump Outlet: 1in

Max Sprinkler Volume: 3.4m³/h/898.18Gal/h

Noise: 30-50db

Maximum Delivery Lift: 48m/157.48ft

Maximum Pressure: 87 psi

Maximum Suction: About 8m/26.2 ft

Maximum Flow Rate: 1200 GPH

Gross Weight: 9.3kg/20.5lbs

Package Size: 57*22*28cm/22.44*8.66*11.02inch

Product Size: 39*23*37cm/15.35*9.06*14.57inch

Package Included

1* Shallow Well Pump

1* Controller

1* English Manual

Other Accessories for Installation

Notes

Please note that 115V refers to the standard voltage of 110V and up to 115V.

Adding water to the pump head until it is full helps to speed up the inlet flow rate. The inlet pipe(Not Included) shall not be excessively bent and the end pipe (not included)shall be completely submerged. Please note that it is only suitable for clean water.

Please read the operating manual completely before use, and pay particular attention to the safety instructions included. Please discharge the waste water if not used frequently and please do not run the pump without water.

Please do not wet the motor before first use, and fill the pump head with water to wet the impeller. Please perform a water test after the installation is complete to check for leaks and other conditions.

Please make sure that the air inlet joint or pipe is completely sealed and air-tight, and that hose used for the water inlet pipe is not sucked and deflated. Check the coupling to see if the internal drive is damaged.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.