aquaneat Fountain Pump, 160 GPH Submersible Water Pump with 3.3 ft Tubing, for Aquarium Fish Tank, Water Table, Waterfall, Hydroponics

Aquaneat 160 GPH Fountain Pump with 3.3ft Tubing
Features:
• The submersible water pump has an adjustable flow valve allowing you to control the water flow accordingly.
• The small water pump work as a replacement pump for various fountains, birdbaths, water tables, waterfalls and other water features.
• The aquarium water pump can be used for circulating water in the tank and for fish tank water changes.
• The fountain pump ensures fresh water pumped through fountain daily and creates babbling brook sounds to relax you.
• 4 pcs of suction cups for either vertical or horizontal mounting
• No need any tools to detach it, easy to separate, easy to clean
Specifications:
• Max Flow Rate: 160 GPH (600L/H)
• Recommended H-Max (Lift height): 2 feet
• Voltage: 110 - 120 V @ 60 Hz
• Length of power cord: 6 feet
• Outlet: Fits 5/16, 1/2 inch ID (inside diameter) tubing
Dimension:
: 2.50" x 1.75" x 2" (L x W x H)
Package includes:
(1) Pump
(2) Outlet adapters
(1) 3.3ft 5/16” Tubing Note:
1. Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump must be completely submersed under water. It would shorten its lifespan and lead to making loud noises when running in the air for long time.
2. Please clean it regularly in case of debris blockage, the pump would make noises if blocked by debris.
3. The maximum flow rate is 160 GPH, there might be a plus-minus tolerance. Every additional foot of pipe, valve and turn will reduce the flow rate a little bit. If the water sprays out the container, the flow rate would also less than 160 GPH
4. 3.6' lift height refers to the height the pump can lift water to at 0 horizontal flow rate. At the stable and constant flow rate, the pump can lift water to about 2' height.