Hi-Run Ribbed Wheel Barrow Tire 4.80/4.00-8 B/4PLY (Tire Only)

GREAT TUBELESS TIRE! However--make sure you have the tubeless RIM that it needs! I did not, so I wrestled to install a tube with my non-tubeless steel rim. to put this tire on. The old tired and tube? Mine was blown, so I just cut it all off the rim. TIP: lay this tire in the hot sun for a few hours first (softens the tight "bead.") Then, get you a hollow cinder block and 2 or 3 simple pry bars, Some like to repaint the rim inside or use black electrician's tape run alongside the welded inner seam to protect the tube. Place the rim above a hole in the block and set this up near some steps (my deck steps worked.) Install tube if needed. Sit on steps and put BOTH FEET down onto the tire as you work your pry bars around to mount the tire onto the rim. Hard work, but can do it! WOILA! It will pop/snap onto the rim. Do both sides. Make sure your tube's valve comes thru the hole--grab it with vice-grips to keep it in there. WINNING! Happy wheelbarrowing.