PURISYSTEMS 3-Speed Remote Air Filtration System, PuriCare 500 Hanging Air Filter w/RF Remote for Woodworking, Garage Air Purifier, Shop Dust Collector, up to 500 sq. ft(350 CFM/450 CFM/500 CFM)

★Large quantities of wood chips and dust are produced during woodworking. These fine particles can float in the air and cause air pollution in the workshop, making the environment unpleasant and affecting human health. To remove wood dust from the air, keep it away from workers, motors and other mechanical equipment.

★Wood dust and chips can make the work environment unpleasant and affect workers' productivity and work experience. Prolonged exposure to polluted air may trigger respiratory diseases such as asthma and chronic bronchitis. Dust can lead to a build-up of flammable substances in the shop floor, which also increases the risk of a potential fire. In the event of a fire, not only are the workers' lives at risk, but there is also considerable damage to property.

★The Puricare 500 was developed with the user's needs and challenges in mind. Equipped with a two-stage filtration system, it removes dust, smoke, mold and other harmful particles down to 1 micron from the air. By improving air quality, the Puricare 500 can help prevent a variety of respiratory ailments such as asthma and chronic bronchitis. This makes it ideal for use in environments such as woodworking, building restoration or renovation. The integrated timer can be set between 1 and 12 hours and switches off automatically after the set time has elapsed. This means that the air in your workshop is cleaned even when you are not there.

★This air filter is equipped with 2 filters, both of which can be easily replaced and are reusable. An outer filter removes larger particles, while the inner filter traps smaller particles.

☛Key Design Features

①Easy to control

Convenient RF remote control provides full access to the dust collector from up to 26 feet away and allows operation from any angle of the room, even if the line of sight is directly obstructed. Remote control has a built-in timer with 1-12 hour setting.

②3-stage speeds

The air filtration can be set to 3 speed levels, which generate a circular air flow and work more efficiently. This puts an end to the fine dust film that covers everything when turning, sanding, sawing, debris, and the air quality is definitely improved.

③All filters included

This air filter is equipped with 2 filters, both of which can be easily replaced and are reusable. An outer filter removes larger particles, while the inner filter traps smaller particles.