Magnetic Jack Pad, Pinch Weld Adapter, Blue, 1 Pack

A Jack Pad That Protects the Pinch Weld When You Lift the Car
Lifting a car on the pinch weld can bend the metal or chip the paint. This magnetic jack pad fits over the pinch weld and spreads the load, so the jack doesn't crush the seam. The magnets hold it in place while you position the jack, so you don't need a second hand.

Who It's For and Where to Use It
Good for DIYers and home mechanics lifting a car in the garage or driveway. It also works for anyone using a floor jack on a unibody vehicle. If you want to protect the pinch weld during a lift, this fits.

Two Magnets Hold It in Place
Two pre-installed magnets hold the pad against the pinch weld while you position the jack. That means you don't need a second hand to keep it steady. The pad stays put until the jack contacts it.

Nylon Insert Protects the Weld
The soft nylon insert sits between the pad and the pinch weld, so the metal doesn't get crushed or scratched. That helps prevent rust and paint damage at the jack point. The aluminum body is machined from aircraft-grade billet.

Fits Pinch Welds Up to 2.992 Inches
The slot fits pinch welds up to 2.992 inches thick, with an opening of 0.378 inches and a width of 2.992 inches. That covers most unibody cars and SUVs. The anodized finish resists corrosion.

What You Get
Material: aircraft-grade aluminum with nylon insert and magnets. Color: Blue. You get 1 magnetic jack pad. Pinch weld thickness up to 2.992 inches.

Common Questions
Will it fit my car? It fits pinch welds up to 2.992 inches thick. Does it stay in place? Yes, two magnets hold it while you position the jack. Does it scratch the weld? The nylon insert protects the metal. Is it strong enough? It's machined from aircraft-grade aluminum.

Care and Support
Wipe with a dry cloth and store it in a tool bag. If you have any questions or issues, just contact our customer service and we'll take care of it for you.