Specification:
Origin: Mainland China
Installation Notes:
1. Because the staircase's structural principle is relatively simple, unlike other installations, this type of ladder does not require on-site measurements. All you need to do is cut the stair opening.
2. Before deciding to install a telescopic staircase, cut the stair opening strictly according to the specified requirements; otherwise, installation will be impossible.
3. Regarding the opening, there are two important points to keep in mind:
First, 8 cm of clearance is left on the sides of the opening. During installation, the four upper corners are supported diagonally by long screws, hanging upside down from the floor. If there is no clearance near the wall, installation will be impossible.
Second, a 40 cm platform is left at the top for easy access. Installing a telescopic staircase is simple, as it comes pre-assembled at the factory. Once the opening is the correct size, all you need to do is install a few screws, so there's no need to worry about installation.
Installation Steps:
1. First, secure the "frame" to the wall (it must be a load-bearing wall) with expansion screws.
2. Secure the bottom staircase to the brackets on the lower "frame." 3. After installing the lower staircase and brackets, install the screws for the upper brackets.
4. Once both brackets are installed, you can use the unit.
Main Material: Metal
Product Color: Black and White
Note:
Due to different monitor settings and lighting conditions, the actual color of the item may vary slightly from the pictures. Thanks for your understanding!
Please allow a 1-2 cm difference in measurements due to manual measuring.
Included:
1x Folding Ladder (with Chinese and English instructions)
