No-Drill Door Bolt Lock 180 Degree with Glue for Push-Pull Sliding Doors and Right Angle Cabinets

This door latch is a surface mounted hardware piece designed for basic door closing and positioning on interior panels doors cabinets and similar household structures.
The overall form uses a two piece layout consisting of a rotating latch arm on one side and a receiving hook on the other side.
When the arm turns into the catch it creates a simple mechanical hold that helps keep the door or panel in a closed position.
The design shown in the reference image follows a compact right angle buckle style with rounded end plates recessed mounting holes and a short turning arm that fits into a vertical hook slot.
The latch is made from metal and uses a formed body structure intended for repeated opening and closing.
The visible surface has a matte appearance and the shape is kept minimal for a neat installed look on flat mounting areas.
Each plate includes preformed screw holes for attachment to a door and frame or to two meeting panel surfaces.
The hardware format is suitable for users looking for a non embedded latch that mounts directly on the surface rather than requiring a cutout inside the door.
Based on the reference information this item is positioned as a no drill style door buckle however actual installation requirements depend on the door material and the mounting method selected by the user.
A 180 degree rotating action allows the latch arm to swing between open and closed positions.
This movement range supports different mounting orientations and can be useful where the latch must rotate fully away from the opening path.
The right angle structure also makes it suitable for door edges frames or panel connections where two surfaces meet with a small offset.
Because of its compact size and straightforward mechanical layout the latch can be considered for sliding doors push pull doors cabinet doors storage compartments utility enclosures bathroom doors or partition panels where a simple surface lock or catch is needed.
The product description is limited to observable and structural details including material form hardware type and general usage range.
It does not claim specific security ratings load values or compatibility with every door construction.
Before installation it is important to confirm the spacing between the two mounting surfaces the alignment of the latch arm with the hook and the thickness and hardness of the door material.
Proper fit depends on exact placement and the dimensions of the door edge frame and gap.
This listing covers one metal latch assembly in a neutral hardware style intended for practical door control and closure in residential or utility environments.