Mini Woodworking Lathe DIY Wood Lathe Machine High-power Multifunctional 220V

Introduction:
The mini multifunctional lathe is a compact desktop machining device suitable for precision turning of wood, plastics, and soft metals. It features the dual-motor drive design, with the main spindle for workpiece rotation and the auxiliary spindle for drilling or auxiliary processing, offering versatile functions and easy operation. It can be used for wood turning, plastic processing, soft metal processing, model making and educational demonstration and can be widely applied to wood processing plants, metal processing centers, technical schools, etc.
Precaution:
Do not wear gloves, scarves, or loose clothing during operation to avoid entanglement hazards.
Wear safety goggles, dust mask, fitted work clothes and other protective equipment.
Never touch rotating chucks, workpieces or tools while the machine is running. Never put hands or tools into the machine during operation.
Do not remove the high-temperature chips with bare hands during machining.
Ensure the power voltage meets equipment requirements (220V/60Hz), and the equipment is properly grounded to prevent electric shock hazards.
Keep children and unauthorized personnel away from the work area.
Keep work area dry, well-ventilated, clean and free of flammable materials.
Operating Method:
Pre-Startup Preparation: Check the machine and ensure that the power voltage meets equipment requirements, all fasteners are tightened, the components are securely connected, the chuck and tools are properly installed, and the work area is clean without interference debris.
Workpiece Clamping: Select the appropriate workpiece size, ensure the diameter is within 1-40mm range, place the workpiece in the chuck center and uses the dual-handle cross-locking mechanism to clamp workpiece.
Tool Installation: Select the appropriate tool type and material, install the tool on the tool rest with the tool tip aligned with the workpiece center, adjust the tool and tighten the tool rest screws to prevent the tool movement during machining.
Speed Selection Reference: Select the appropriate speed on the basis of the processing material: Soft Wood: 2000-3000 RPM; Hard Wood: 1500-2500 RPM; Plastic: 1200-2000 RPM; Aluminum: 1500-2500 RPM; Copper: 1200-2000 RPM
Machining Operation: Before starting, confirm the sufficient clearance between the tool and the workpiece. Slowly adjust the speed to the set value, use the handwheel to slowly feed the tool and begin cutting. After machining, retract the tool before turning off power.
Shutdown Procedure: Retract the tool away from the workpiece to the safe position. Turn off motor power, and wait for the spindle to completely stop rotating. Clean away chips and debris. Loosen the chuck and remove the workpiece.

Parameter:
Input Voltage: AC220V/60HZ Single-Phase
Maximum Swing over Bed: 3.1IN(80MM)
Maximum Processing Length: 7.8IN(200MM)
Main Spindle Chuck Model: K02-63 Four-Jaw Hand Chuck
Chuck Clamping Range: 0.04-1.5 Inches(1-40MM)
Spindle Speed Range: 1200-3000RPM(Stepless)
Main Spindle Motor Power: 350W
Auxiliary Spindle Power: 350W
Tailstock Model: B12 Drill Chuck
Tailstock Clamping Range: 0.04-0.4 Inch(1-10MM)
Packing Dimension: 24.8*16.9*15.7 Inches(63*43*40CM)
Net Weight/Gross Weight: 60.8LBS(27.6KG)/65.3LBS(29.6KG)

Items Included: 028037-EnzS
Multifunctional Mini Woodworking Lathe 220V