Hero image 0 of Medalist Golf Simulator Enclosure, 0 of 14

Medalist Golf Simulator Enclosure

(No ratings yet)

Key item features

‌Commercial-Grade Aluminum Frame: Built with a heavy-duty, 1.5" wide, extruded aluminum frame that’s significantly stronger and more durable than typical steel or EMT systems for long-lasting performance.Spacious, Realistic Design: Generous enclosure size (approx. 12’ W x 8’6” H x 5’ D) creates a true-to-life hitting environment.Enhanced Safety & Light Control: Thicker top and side enclosure walls help contain shots, reduce ricochet risk, and block ambient light for a more immersive simulator experience.2-piece Screen System: The front screen attaches with Velcro to the rear screen allowing for easier adjustment and tightening, and works seamlessly with Ace Indoor Golf’s gap pads, and frame pads for a clean, finished look.Frame Pads: High-density, 2" thick frame pads attach directly to the enclosure frame using Velcro to prevent ricochet and injury while creating a polished, professional finish.Gap Pads: Fill the space between the screen and enclosure frame to prevent balls getting through gaps and damaging your room.Floor-to-Top Screen Coverage: Impact screen is designed to run from the floor to the top of the screen for a fully immersive, edge-to-edge image.Turnbuckle Cable Reinforcement: Rear corner-to-corner turnbuckle cable system adds superior frame tension and stability—an upgrade not commonly found in competing enclosures.Reduced Noise & Impact Stress: Wide #4 grommets are double-stitched into reinforced webbing allow bungees to be threaded through and attached to the frame helping distribute impact, reduce noise, and limit puckering.DIY or Professional Installation: Designed for straightforward assembly that can be completed in about four hours with common tools.Built for Home or Commercial Use: Ideal for home simulators, teaching studios, and indoor golf facilities that demand durability, performance, and a premium appearance.
Spacious, Realistic Design: Generous enclosure size (approx. 12’ W x 8’6” H x 5’ D) creates a true-to-life hitting environment.
Enhanced Safety & Light Control: Thicker top and side enclosure walls help contain shots, reduce ricochet risk, and block ambient light for a more immersive simulator experience.
2-piece Screen System: The front screen attaches with Velcro to the rear screen allowing for easier adjustment and tightening, and works seamlessly with Ace Indoor Golf’s gap pads, and frame pads for a clean, finished look.
Frame Pads: High-density, 2" thick frame pads attach directly to the enclosure frame using Velcro to prevent ricochet and injury while creating a polished, professional finish.
Gap Pads: Fill the space between the screen and enclosure frame to prevent balls getting through gaps and damaging your room.
Floor-to-Top Screen Coverage: Impact screen is designed to run from the floor to the top of the screen for a fully immersive, edge-to-edge image.
Turnbuckle Cable Reinforcement: Rear corner-to-corner turnbuckle cable system adds superior frame tension and stability—an upgrade not commonly found in competing enclosures.
Reduced Noise & Impact Stress: Wide #4 grommets are double-stitched into reinforced webbing allow bungees to be threaded through and attached to the frame helping distribute impact, reduce noise, and limit puckering.
DIY or Professional Installation: Designed for straightforward assembly that can be completed in about four hours with common tools.
Built for Home or Commercial Use: Ideal for home simulators, teaching studios, and indoor golf facilities that demand durability, performance, and a premium appearance.

Specs

Brand
Ace Indoor Golf
Dexterity
Ambidextrous
Weight
300 lb
Material
Polyester
Dimensions
70.00 x 144.00 x 102.00 in
Color
Black

Current price is $4,699.00

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives between May 8 - May 13

Sold and shipped by Ace Indoor Golf, LLC

Report an issue with this seller

Free 30-day returns - online only

About this item

Product details

The Ace Indoor Golf Medalist Enclosure is a premium, commercial-grade golf simulator enclosure built for golfers who want a clean, professional look with unmatched durability. Designed with a heavy-duty extruded aluminum frame—significantly stronger than typical steel alternatives—the Medalist delivers rock-solid stability for consistent performance shot after shot. Its spacious design (12’ W x 8’6” H x 5’ D) provides a true-to-life hitting environment, while the enclosure’s deeper side and top panels offer added safety and light control for a more immersive experience. Paired with Ace’s industry-leading screen system, the Medalist Enclosure integrates seamlessly with an Ace 2-piece screen, gap pads, and frame pads. This creates a tight, finished look while helping absorb impact, reduce bounce-back, and minimize noise. Whether you’re building a home simulator or outfitting a commercial space, the Medalist is engineered for easy DIY installation or professional setup—delivering a high-end simulator experience that’s built to last.

‌Commercial-Grade Aluminum Frame: Built with a heavy-duty, 1.5" wide, extruded aluminum frame that’s significantly stronger and more durable than typical steel or EMT systems for long-lasting performance.Spacious, Realistic Design: Generous enclosure size (approx. 12’ W x 8’6” H x 5’ D) creates a true-to-life hitting environment.Enhanced Safety & Light Control: Thicker top and side enclosure walls help contain shots, reduce ricochet risk, and block ambient light for a more immersive simulator experience.2-piece Screen System: The front screen attaches with Velcro to the rear screen allowing for easier adjustment and tightening, and works seamlessly with Ace Indoor Golf’s gap pads, and frame pads for a clean, finished look.Frame Pads: High-density, 2" thick frame pads attach directly to the enclosure frame using Velcro to prevent ricochet and injury while creating a polished, professional finish.Gap Pads: Fill the space between the screen and enclosure frame to prevent balls getting through gaps and damaging your room.Floor-to-Top Screen Coverage: Impact screen is designed to run from the floor to the top of the screen for a fully immersive, edge-to-edge image.Turnbuckle Cable Reinforcement: Rear corner-to-corner turnbuckle cable system adds superior frame tension and stability—an upgrade not commonly found in competing enclosures.Reduced Noise & Impact Stress: Wide #4 grommets are double-stitched into reinforced webbing allow bungees to be threaded through and attached to the frame helping distribute impact, reduce noise, and limit puckering.DIY or Professional Installation: Designed for straightforward assembly that can be completed in about four hours with common tools.Built for Home or Commercial Use: Ideal for home simulators, teaching studios, and indoor golf facilities that demand durability, performance, and a premium appearance.
Spacious, Realistic Design: Generous enclosure size (approx. 12’ W x 8’6” H x 5’ D) creates a true-to-life hitting environment.
Enhanced Safety & Light Control: Thicker top and side enclosure walls help contain shots, reduce ricochet risk, and block ambient light for a more immersive simulator experience.
2-piece Screen System: The front screen attaches with Velcro to the rear screen allowing for easier adjustment and tightening, and works seamlessly with Ace Indoor Golf’s gap pads, and frame pads for a clean, finished look.
Frame Pads: High-density, 2" thick frame pads attach directly to the enclosure frame using Velcro to prevent ricochet and injury while creating a polished, professional finish.
Gap Pads: Fill the space between the screen and enclosure frame to prevent balls getting through gaps and damaging your room.
Floor-to-Top Screen Coverage: Impact screen is designed to run from the floor to the top of the screen for a fully immersive, edge-to-edge image.
Turnbuckle Cable Reinforcement: Rear corner-to-corner turnbuckle cable system adds superior frame tension and stability—an upgrade not commonly found in competing enclosures.
Reduced Noise & Impact Stress: Wide #4 grommets are double-stitched into reinforced webbing allow bungees to be threaded through and attached to the frame helping distribute impact, reduce noise, and limit puckering.
DIY or Professional Installation: Designed for straightforward assembly that can be completed in about four hours with common tools.
Built for Home or Commercial Use: Ideal for home simulators, teaching studios, and indoor golf facilities that demand durability, performance, and a premium appearance.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

Ace Indoor Golf

Dexterity

Ambidextrous

Weight

300 lb

Material

Polyester

Warranty

Warranty information

30-day

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.