Clear Epoxy Resin AB Glue Casting for Casting Resin Jewelry DIY Mix 1:1 Ratio

Feature:
This Epoxy Resin is excellent for jewelry making.
It is also widely used in castings,decorative purposes and all crafts.
It can be cured under normal temperature and high temperature,
with the feature of non-toxic,low odor,good flowing property,
natural defoaming, anti-yellow, self doming, high transparency, no ripple, bright in surface.

Resin Kit Includes:
1PC Glue A 50g
1PC Glue B 50g

Instructions:
1 Measure part A and part B according to the volume ratio (A:B=1:1) into two plastic measuring cups,
stir slowly for 2 minutes until the mixture clears,
place it along for 3 to 5 minutes to allow the bubbles to dissipate, and then it can be used.

2 Working time: 25 ° 90 minutes (100ml mixture)
Curing conditions: 25 ° 8-24 hours or (at 50 ° bake for 2 hours)

3 You can use molds to cast resin shapes. Or fill beautiful metal bezels.
Change the resin color with pigments and mica powders,add glitters for sparkling effects and create beautiful faux Opals.
Or draw a for creative resin painting. for Play your imagination and make any resin crafts you like.


Note:
1 Must mix AB glue according to the volume ratio (A:B=1:1) .
But Glue A is higher volume than glue B, around 1.1-1.5 times,
So your weight difference must be controlled in 5%,
for example, if AB glue is 100 gram, A glue 55 g, and B glue need 45- 55 g.
2 1:1 Resin is fast-curing glue than 3:1 Resin, the top can be curing after one hour,
Completely curing, It needs around 8-12 hour in summer,and winter 12-20 hour
The higher temperature, the shorter curing for time .
3 We suggest not stir too much below 50 grams every for time .
Because it cure easily in the short for time,the top can be curing after one hour.
4 The for time of stirring had better is over 60 seconds,
and must wait to bubbles to dissipate, and then it can be used.

Package includes:
1 set X AB Glue .
1PC Glue B 50 g.
1PC Glue A 50 g