Mount-It! In-Wall Cable Concealer with Recessed Power

We had a brand new 55" TV that I wanted to mount on the LR wall, but NOT have all the cables hanging below. I actually put the main plate in the LR and the secondary plate in the adjacent room, so the receiver and DVD player are out of sight. This option was possible because my remotes are radio frequency (so can transmit through walls) not InfraRed (which would need a repeater.) Installation requires above average DIY skills. I actually cut out a 18"X36" section of sheetrock so that I could get sufficient access for running cables (old house with non standard stud alignment.) After I made enough room, I cut a templated hole into a new piece of sheetrock for the main plate, passed the power supply through, cut off the plug and wired directly to the house service. I also ran 2 HDMI cables (one for receiver, one for DVD player) through both plates. The sheet rock was then screwed in place, joints taped, joint compound applied, smoothed, primed and painted. The TV was attached with a swing arm, just floats off the wall. The final job looks amazing!

This was so easy to use and made a world of difference in the coziness of our living room. No more cords showing and I installed it in about 10 minutes. Definitely worth it!