Picking a cord hider (raceway) comes down to capacity, length, and finish.

• Capacity: Gather your cables, measure the bundle’s approximate width/height, and choose a channel with slightly more internal space to avoid tight bends.
• Length & pieces: Add up the run you need and look for kits with enough straight sections and optional elbows/joints for corners.
• Mounting: Peel-and-stick is quick on smooth walls; screw-mount tracks can offer added support.
• Finish: Paintable covers can blend into your wall.
• Power vs. low-voltage: Keep TV power cords and signal cables organized cleanly. For in-wall routing, consider code-compliant solutions and consult a qualified installer if you’re unsure.

You’ll find on-wall raceways, concealer kits, and behind-the-wall options on Walmart.com with dimensions listed.

It helps to size clips to the actual cable diameter and bundle.

• Measure: Use a ruler or tape to gauge the cord’s diameter; for bundles, measure the combined thickness.
• Choose slack: Pick clips slightly larger than the cord so it isn’t pinched.
• Adjustable options: Look for adjustable or R‑style clips for bulky power cables or thick bundles.
• Adhesion & surface: Strong adhesive clips work best on clean, smooth surfaces. For textured walls or heavier cables, larger clips or screw-in styles (where allowed) may hold better.
• Prep: Clean the area with isopropyl alcohol and let it dry before sticking.

Most listings on Walmart.com include size/inner diameter details to match your cables more precisely.

You’ve got plenty of renter‑friendly cable management options that avoid drilling.

• Peel-and-stick clips: Use removable adhesive cable clips on smooth walls or furniture; test a small spot first.
• Clamp-on trays: Under-desk cable trays with clamps mount and remove without tools.
• Sleeves & wraps: Neoprene sleeves, spiral wraps, and hook-and-loop ties bundle cords neatly.
• Cord covers: Low-profile floor covers help route cables across rooms; position them to avoid trip areas.
• Removal tip: Warm adhesive gently with a hair dryer for easier, cleaner removal.

Results can vary by paint or finish, so go slow when removing. You’ll find no‑drill trays, adhesive clips, and sleeves on Walmart.com.

A simple plan can make your desk look clean and easier to use.

1. Map your layout: Decide where a power strip and adapters will sit (often in a tray with ventilation).
2. Mount without drilling: Clamp-on cable trays and boxes help keep cords off the floor.
3. Bundle smart: Group related cables with reusable ties; run them along the desk’s back edge.
4. Use anchors: Stick-on mounts or clips guide cables to the tray; press firmly on clean, dry surfaces.
5. Leave service loops: Add a little slack near devices so you can move them without strain.
6. Safety: Avoid overloading outlets and keep cords clear of chair casters.

Walmart.com carries trays, clips, ties, and sleeves to complete the setup.

Careful removal can help reduce residue and protect surfaces.

• Warm first: Gently heat the clip and adhesive with a hair dryer for 20–30 seconds.
• Lift slowly: Pry up an edge with a plastic card and peel back at a low angle.
• Floss trick: Slide dental floss behind the clip in a sawing motion to separate adhesive layers.
• Clean residue: Use a small amount of adhesive remover or isopropyl alcohol on a cloth; test in an inconspicuous spot.
• Be patient: Reapply gentle heat if the adhesive resists. Avoid harsh scraping on painted or finished surfaces.

Surface types vary, so proceed cautiously and stop if you notice finish damage.