Absolutely—there are right‑angle HDMI options to help in tight spaces. You’ll typically see:

• Cables with 90‑degree plugs: Handy behind wall‑mounted TVs or inside media cabinets.
• Right‑angle adapters (male‑to‑female): 90° or 270° pieces that change the cable’s exit direction while using your existing cable.

Before you buy, consider:

• Performance: HDMI 2.0 (18 Gbps) supports 4K@60Hz; HDMI 2.1 (up to 48 Gbps) supports 8K@60Hz and 4K@120Hz, plus eARC and HDR.
• Orientation: Choose up, down, left, or right to match your port layout.
• Length: From short jumpers to longer runs, pick only what you need.

You can shop online and choose pickup or delivery for convenience.

A right‑angle HDMI adapter is a small male‑to‑female coupler that changes the direction of your HDMI connection so the cable hugs the device instead of sticking straight out.

• Use cases: Wall‑mounted TVs, tight shelves, or to reduce strain on ports.
• Angles: Common orientations are 90° and 270°, plus vertical or horizontal styles (often described as up, down, left, or right).
• Specs to match: Choose an adapter rated for your needs—HDMI 2.0 (18 Gbps) for 4K@60Hz or HDMI 2.1 (up to 48 Gbps) for 8K@60Hz/4K@120Hz, HDR, and eARC.

Tip: Check your TV’s port direction and test the fit before final mounting whenever possible.

HDMI comes in a few connector sizes, and matching the shape matters:

• Type A (Standard): Full‑size port on most TVs, monitors, and AV gear. Many right‑angle adapters and cables use this size.
• Type C (Mini): Smaller connector often found on some tablets or cameras.
• Type D (Micro): Very small connector commonly used on action cameras or compact devices.

Keep in mind, connector size is different from HDMI version. Versions (like HDMI 2.0 or 2.1) indicate features and bandwidth, such as 4K@60Hz, 8K@60Hz, HDR, eARC, and HDCP support. You can use adapters or cables to go from Mini/Micro to Standard, including right‑angle options when space is tight.

Orientation affects fit and cable management more than signal flow. Right‑angle pieces come in different directions—often labeled 90° or 270°, plus vertical or horizontal—so the cable exits up, down, left, or right based on your port location.

• Fit first: Check where your TV’s HDMI port sits (side or rear) and how close it is to a wall.
• Cable stress: A correctly oriented adapter can reduce strain and allow a gentler bend radius.
• Directionality: Standard HDMI cables and passive right‑angle adapters are generally not directional. However, some products (like HDMI‑to‑VGA or certain extenders) work one way only—follow any “source/display” labels.

Test orientation before mounting for the easiest setup.

A quality right‑angle HDMI adapter typically preserves performance when it’s rated for your signal. Consider these points:

• Match the bandwidth: For 4K@60Hz and HDR, look for HDMI 2.0 (18 Gbps). For 8K@60Hz or 4K@120Hz, choose HDMI 2.1 (up to 48 Gbps) and eARC support if needed.
• Keep the chain simple: Fewer connection points can help minimize potential signal issues.
• Compliance matters: HDCP 2.2/2.3 support may be important for 4K streaming sources.
• Fit and contact: A snug, properly oriented connection can help reduce intermittent dropouts.

Results can vary with cable length and device settings, so testing with your setup is a practical step.