Most controllers in this category use a Micro‑USB (USB 2.0 Micro‑B) port on the controller and a standard USB‑A plug on the other end.

• Controller end: Micro‑USB (often labeled Micro‑B).
• Console/charger end: USB‑A (the rectangular plug).
• For first‑time pairing or wired play, choose a sync‑and‑charge cable that supports data, not charge‑only.
• Lengths vary from short (6 in–3 ft) to long runs (10–15 ft+), so pick what matches your setup.

Gently insert the Micro‑USB in the correct orientation to help avoid port wear. Options on this page include a range of lengths and durable braided jackets that can support everyday use.

Wireless setup is possible in a few scenarios:

• If the controller was previously paired to the same console, press the center button to wake it and reconnect within range.
• To add a new controller without a cable, use another paired controller to open the console’s Bluetooth device menu. On the new one, hold Share + the center button until the light flashes, then select it on‑screen.
• Menu names can vary by system software, and results can differ by setup.

If you can’t access the menu, a short Micro‑USB cable is typically the easiest way to complete the initial pairing before switching to wireless.

This controller uses Micro‑USB rather than USB‑C.

• Look for cables labeled Micro‑USB or USB 2.0 A‑Male to Micro‑B.
• USB‑C plugs won’t fit the controller’s port.
• For charging and wired play, choose a cable that supports both power and data (often called sync‑and‑charge).
• If your power source only has modern ports, an appropriate adapter or cable can work, but performance can vary by adapter and cable quality.

Selecting the correct connector can help reduce loose fits and intermittent charging.

It depends on your room and seating distance. A quick guide:

• Up to 6 ft: Good for gaming close to the console, desks, or charging at a stand.
• Around 10 ft: A common couch distance that offers slack without excess cable.
• 15 ft and above: Helpful for bigger rooms; consider thicker, well‑shielded or braided options to help maintain a stable connection.

Measure your route and add a little extra for routing around furniture. Longer runs can introduce more resistance, so a sturdier cable may help. Securing cables along walls or under protectors can reduce trip hazards.

A few quick checks can help isolate the issue:

• Confirm the cable supports data (sync‑and‑charge), not charge‑only.
• Fully seat both ends; align the Micro‑USB correctly—don’t force it.
• Try a different USB port on the console or a different power source.
• Test with a shorter or different cable to rule out cable wear.
• Inspect the controller’s port for dust or debris and gently clear it if needed.
• Restart the console; if available, use the controller’s reset pinhole to reinitialize.

These steps can help improve charging and connection, but results may vary with cable and device condition. If problems persist, consider professional support.