It's not necessary to add water to the bottom of your Nesco roaster unless a specific recipe calls for it. Most roaster ovens are designed to cook food using the heat generated from the sides, which helps retain moisture naturally. Adding water directly to the heating element area isn't recommended as it can affect cooking performance and safety. For best results, follow your recipe's instructions and place food in the cookwell. If you want extra moisture, you can add broth or water to the cookwell, but avoid pouring it under the pan or near the heating element.

Using a Nesco roaster oven is simple and convenient.

1. First, plug in the roaster and set it on a stable, heat-resistant surface.
2. Place the removable cookwell inside and preheat to your desired temperature.
3. Add your ingredients to the cookwell, following your recipe.
4. Cover with the lid and let the roaster do the work.

Cooking times for turkey in a roaster oven can vary based on the bird's size and whether it's stuffed. As a general guideline, plan for about 15 to 20 minutes per pound at 325°F. For example, a 12-pound turkey may take around 3 to 4 hours. Always use a meat thermometer to check that the internal temperature reaches at least 165°F in the thickest part. Let the turkey rest before carving for juicier results. For more precise timing, refer to the instruction manual or your recipe.

Nesco roaster ovens are popular for their versatility and ease of use. They can handle roasting, baking, steaming, and slow cooking, making them a handy addition to any kitchen.

• The removable porcelain cookwell is easy to clean and helps distribute heat evenly.
• Adjustable temperature controls let you cook a wide range of dishes.
• They're portable, so you can use them for family gatherings or holiday meals.

Cleaning your Nesco roaster is straightforward.

1. Allow the roaster to cool completely before cleaning.
2. Remove the cookwell and rack, then wash them with warm, soapy water.
3. Wipe down the exterior and heating base with a damp cloth—never immerse the base in water.
4. Dry all parts thoroughly before reassembling.