You’ll typically see it called a plug-in pendant light cord, swag light cord, lamp cord set, or light bulb socket with cord. These cords usually feature a standard E26/E27 socket for medium-base bulbs, an inline on/off switch, and a two- or three-prong plug.

• Use with compatible bulbs and stay within the cord’s wattage rating.
• Choose a length that fits your ceiling height and where you want the switch.
• If grounding is needed, pick a three-prong grounded cord.
• Some versions include socket rings so you can add a shade.

When browsing, check cord length, switch placement, socket type, and safety listings to match your space and setup.

There are practical ways to get a plug-in setup without permanent wiring changes, but safety and compatibility matter.

• Use a plug-in conversion cord that’s designed for fixtures, following the kit’s instructions and ratings.
• Alternatively, hang a plug-in pendant cord with its own socket to get a similar look without modifying your fixture.
• Support the weight with anchors or swag hooks—don’t rely on the cord alone.
• If grounding is required, choose a three-prong grounded cord.
• Follow local codes and consider a qualified electrician if any rewiring is involved.

Balancing the fixture’s weight, wattage, and cord ratings can help you create a safe, flexible lighting setup.

The simplest route is pairing your bulb with a plug-in lamp cord that has an E26/E27 socket.

• Screw the bulb into the socket, plug into the outlet, and use the inline switch.
• Confirm the cord’s maximum wattage and choose bulbs within that limit; LEDs are a practical, low-heat option.
• Pick a cord length and switch position that match your room layout.
• Use indoor cords inside; only use outdoor-rated cords in damp or exterior areas.
• Want a shaded look? Choose cords with socket rings that secure compatible shades.

This approach can provide flexible, portable lighting for rentals, dorms, or quick projects without permanent installation.

It’s possible to refresh a lamp with a new cord, but take a safety-first approach and use listed components.

• Select a replacement cord set compatible with your socket (E26/E27) and wattage.
• Match the plug type: polarized two-prong for certain insulated lamps; three-prong grounded for fixtures that require grounding.
• Unplug the lamp, use proper strain relief, and follow the kit’s instructions for secure connections.
• Inspect the socket and hardware; if anything looks damaged or unfamiliar, consider professional help.
• As an alternative, a ready-made plug-in pendant cord can provide fresh wiring without disassembly.

If you’re unsure at any step, consulting a qualified electrician can help ensure a safe outcome for your specific lamp.

Match the cord to your environment and load for safer, more reliable outdoor lighting.

• Look for outdoor-rated jackets (such as SJTW) and recognized safety listings.
• Pick the right gauge: lower AWG numbers (12/10) handle higher current and longer runs; higher AWG (16) suits lighter loads.
• Use three-prong grounded cords for most outdoor applications.
• Choose the shortest length that reaches to reduce voltage drop and clutter.
• Keep connections off the ground and use GFCI-protected outlets in damp locations.

Always compare the cord’s amp rating with the total wattage of your lights. Selecting cords that match your application can help with performance and durability in changing weather.