Choosing the right downlight size depends on your room's layout and ceiling height.

• Smaller downlights (like 2 to 4 inches) work well for accent lighting or lower ceilings.
• Larger downlights (5 to 6 inches) are great for general lighting in living rooms or kitchens.
• Measure your existing can or space to ensure a proper fit for retrofit models.

It's also helpful to consider how much light you want in your space. Multiple smaller lights provide a more even look, while larger ones offer brighter zones.

Yes, many LED downlights listed as "canless" are designed to be installed directly into your ceiling, no existing can required.

• These models are typically slim and fit in tight spaces.
• Look for the term "canless" or "integrated" in the product name or description.
• Always check the installation guide, and if you're unsure about electrical work, consider consulting a licensed electrician for safety.

This makes upgrading or adding new lighting much easier in spaces without old recessed fixtures.

Some downlights are rated for damp or wet locations, but not all.

• Check the product specifications for terms like "damp rated" or "wet rated" if you plan to use them in bathrooms or laundry rooms.
• Models designed for moisture-prone spaces have extra protection against humidity and splashes.
• For safety, always follow the manufacturer’s installation instructions and observe local building codes.

Choosing the right rating helps ensure long-lasting performance and added peace of mind in moisture-rich areas.

Many modern LED downlights feature selectable color temperatures.

• Look for models with a built-in switch labeled with different color settings (for example, soft white, bright white, or daylight).
• The switch is usually found on the light’s junction box or the back of the fixture.
• Before installation, set your preferred color temperature, then complete the installation.

If you're unsure, refer to the product manual included in the packaging for detailed instructions.

To clean your LED downlight safely and keep it looking great:

• Turn off the power at the switch or breaker before cleaning.
• Use a dry or slightly damp (not wet) microfiber cloth to gently wipe the trim and lens.
• Avoid using harsh cleaners or sprays directly on the fixture.
• For stubborn spots, a mild soap solution applied to the cloth (not the light) can help.

Wait until the area is completely dry before switching the power back on.