Start by matching the clip style to where you’ll hang your lights and the type of lights you use.

• Gutters: Look for S-shaped or dedicated gutter hooks that slide over the gutter lip. Check the lip thickness and choose plastic or metal based on light weight.
• Shingles/roof edges: Choose clips designed to tuck under shingles or grip roof edges without nails or screws.
• Walls/patios: Consider outdoor-rated adhesive light clips for smooth, clean surfaces. Verify weather and temperature ratings.
• Light type: Heavier C7/C9 bulbs or rope lights may benefit from heavy-duty or metal hooks; mini LEDs often pair well with standard plastic clips.

Review product specs and customer feedback on Walmart.com for fit, material, and count options. Pickup and delivery options may be available depending on your location.

A quick estimate helps you pick the right pack size.

1. Measure your run: Add up the feet along gutters, eaves, and around corners.
2. Choose spacing: Many people space hooks about 12–18 inches for standard string lights. For heavier bulbs or icicle strands, 6–12 inches can reduce sag. Preferences and results vary.
3. Do the math: Total feet ÷ chosen spacing = approximate clip count.
4. Add extras: Plan 10–20% more for corners, transitions, replacements, and cord management.

Example: 60 ft at 18 in spacing is about 40 clips, plus ~8 extra. Walmart product pages list pack sizes (e.g., multipacks) so you can choose one or two sets to cover your layout. Availability for pickup or delivery may vary by area.

Surface matters for a secure hold, especially outdoors.

• Brick/masonry: Adhesive clips can be hit-or-miss on rough, porous surfaces. If adhesion is uncertain, consider routing your lights to gutters, eaves, or soffits using gutter or roof-edge hooks instead of sticking directly to brick.
• Siding (smooth): Outdoor, weather-rated adhesive clips may work when the surface is clean and dry. Check the temperature range and weight limits, and allow proper cure time per instructions.
• Workarounds: Run lights along trim, fascia, or under eaves where clip-on or adhesive options tend to hold better.

Always review the product details on Walmart.com for “outdoor,” “weatherproof,” and surface compatibility notes. Test a small area first if you’re unsure.

Both can work, but the right choice depends on your lights and conditions.

• Metal (stainless or galvanized): Generally more rigid and may offer stronger grip for heavier C7/C9 or rope lights. Helpful where gusts are common.
• Plastic: Lightweight and easy to install; heavy-duty, weatherproof designs can perform well with mini LEDs or lighter runs.
• Design matters: Closed or tighter S-shapes can reduce slip. Extra clips at corners and ends can help reduce movement.
• Adhesive clips: Check cold-weather ratings; extreme temperatures and moisture can affect hold.

Whichever you choose, avoid overloading, and consider adding occasional cable ties (loosely) for added stability. Compare materials, weight limits, and customer reviews on Walmart.com before buying.

A careful takedown helps protect your home and makes next year easier.

1. Unhook first: Power off, then remove lights from the hooks or clips before taking down the hardware.
2. Adhesive clips: Follow the strip’s directions. Typically, warming the adhesive slightly and pulling the tab slowly at a low angle can help minimize surface damage. If residue remains, use a gentle, surface-safe adhesive remover.
3. Clean and dry: Wipe clips to remove moisture and debris.
4. Store smart: Keep clips in a labeled, sealed bag or bin in a cool, dry place. Note any broken pieces to replace next season.

Check Walmart.com for replacement packs and, where available, convenient pickup or delivery options.