People use “flat charger” to describe a few slim, space‑saving options you’ll see on this page:

• Flat USB wall charger: a low‑profile, ultra‑slim plug that sits close to the outlet, often with foldable blades and USB‑C/USB‑A ports.
• Wireless charging pad: a flat, Qi‑compatible pad for phones and earbuds that support wireless charging.
• Flat plug power strip/charging station: a compact strip with a flat plug and built‑in USB ports for desks, nightstands, or travel.

Benefits can include saving space behind furniture, packing easily for travel, and keeping cables tidy on a desk. When browsing, check total wattage, port types, included cable length (if any), and plug style so you get the right fit for your devices and setup.

Flat wireless pads use inductive charging (Qi standard) to transfer power from the pad’s coil to a compatible device’s coil.

1. Connect power: plug the pad into a wall adapter that meets its rated output (for example, up to 10–15W).
2. Align the coils: center your phone or earbuds on the pad; alignment affects speed.
3. Watch indicators: many pads have LEDs to show charging status.

• Works with Qi‑enabled phones and earbuds; devices without Qi won’t charge wirelessly.
• Thin, non‑metal cases often work; thick cases or metal/magnetic attachments can slow or block charging.
• Using a quality adapter and cable that match the pad’s rating can help maintain performance.
• Place the pad on a flat, ventilated surface to help manage heat.

Charging speeds can vary based on device, case, and alignment.

Whether you’re using a flat USB wall charger or a wireless pad, a few basics can promote safer use:

• Look for certifications: UL, ETL, FCC, and Qi certification indicate testing to common standards.
• Match power correctly: use adapters and cables rated for the charger’s wattage to reduce heat and drop‑offs.
• Give it air: place chargers on hard, ventilated surfaces and avoid covering them with fabric.
• Monitor heat and condition: unplug and let things cool if you notice excess warmth, odor, or damage.
• Avoid liquids: keep chargers and cables dry and replace frayed cords.
• Travel check: confirm outlet types and any rules about power strips in your destination.

These tips can help, but conditions vary by device, environment, and cable quality.

A flat plug (often called flat‑pin) charger is a low‑profile wall charger that uses flat blades and a slim housing to sit closer to the outlet. Many versions include foldable pins for travel and offer one or more USB‑C/USB‑A ports for phones, tablets, and accessories.

• Space‑saving: helpful behind furniture or in tight outlets.
• Travel‑friendly: foldable blades reduce snags in bags.
• Versatile: works with various devices when paired with the appropriate cable.
• Regional note: plug and voltage standards vary by country; some chargers support 100–240V, but always check the label and use suitable adapters if needed.

When comparing options, consider total wattage and how power is shared across ports.

Pick a flat USB‑C charger based on your laptop’s power needs and how you’ll use it:

• Wattage: match or exceed your laptop’s requirement (for example, 45W, 65W, 100W). Lower wattage may charge slowly or just maintain battery.
• USB Power Delivery: look for USB‑C PD support to improve compatibility with many laptops and tablets.
• Ports: single‑port chargers dedicate full power to one device; multi‑port models may split wattage when you plug in more than one device.
• Cable: use a certified cable rated for the needed wattage; higher‑power cables often include an e‑marker chip.
• Design: a slim, foldable flat plug helps with tight outlets and travel.

You can filter by wattage, port count, and plug style to find a good fit.