Programming a DIRECTV universal remote to your TV is pretty straightforward. Here’s a general guide:

1. Turn on your TV and DIRECTV receiver.
2. Press and hold the Mute and Select buttons on the remote until the light blinks twice.
3. Enter the TV’s manufacturer code (found in the remote’s manual or online).
4. Press Power to test. If your TV turns off, the setup worked. If not, try another code.

Keep in mind, steps may vary slightly depending on your remote model. Always check the included programming manual for model-specific instructions.

Yes, many universal remotes are designed to work with DIRECTV receivers. When choosing a remote, look for compatibility with DIRECTV or satellite receivers in the product details. Some remotes support both IR (infrared) and RF (radio frequency) signals, which can be helpful if your receiver is out of sight. Be sure to check the remote’s compatibility list and consider your receiver model for the best experience.

DIRECTV universal remotes can often be programmed to control Hisense TVs. Most remotes include a code list for popular TV brands, including Hisense. If you don’t see your TV brand listed, you can usually try an automatic code search function. If you run into trouble, double-check the remote’s manual or visit the manufacturer’s website for updated codes and troubleshooting tips.

When shopping for a DIRECTV universal remote, consider these features:

• IR/RF capability: Lets you control devices even if they’re behind cabinet doors.
• Backlit buttons: Handy for low-light viewing.
• Multi-device support: Controls your TV, receiver, and other electronics.
• Easy programming: Look for remotes with clear instructions and code lists.
• Battery life: Some remotes include batteries or offer energy-saving features.

Think about your setup and what would make your viewing experience easier.

If your DIRECTV universal remote isn’t responding, a reset can help. Here’s a simple method:

1. Press and hold the Mute and Select buttons together until the light flashes twice.
2. Enter 981 on the keypad. The light should flash four times, indicating the reset is complete.
3. Reprogram the remote to your devices as needed.

Always check your remote’s manual for model-specific reset steps, as these can vary. If issues persist, replacing the batteries or consulting the manufacturer’s support resources may help.