Start by measuring your space so the table feels intentional, not crowded.

• Depth: Measure the gap between the wall and couch back. Look for a narrow design that fits comfortably; some behind‑the‑couch tables are as slim as about 6 inches.
• Length: Note your sofa length and choose a console that’s similar or slightly shorter. You’ll also find extra‑long options (around 63–78 inches), plus select models with adjustable length for flexible layouts.
• Height: Aim for a height close to your sofa back. Some tables offer adjustable height to fine‑tune the look and reach.
• Power reach: If the table has a charging station, check the extension cord length on the product page and plan placement near a wall outlet.

It varies by model, but many console tables in this category include a built‑in charging station with a mix of ports.

• AC outlets: Common for lamps or small accessories.
• USB‑A ports: Widely used for phones, earbuds, and tablets.
• USB‑C ports: Available on select tables for newer devices.

The number and type of ports, plus total output, differ across products. It’s a good idea to review the specs on the item page to confirm compatibility with your devices. These stations are generally intended for low‑to‑moderate draw electronics; avoiding high‑wattage appliances can help maintain safe use. If you prefer faster charging, look for models that list higher USB output or include USB‑C.

Thoughtful setup can help you get the most from a console table with a charging station.

• Placement: Position the table close to a wall outlet so cords aren’t stretched across walkways.
• Dry zone: Keep liquids away from outlets and USB ports, and unplug devices before cleaning nearby surfaces.
• Load awareness: Check the product page for amp/watt details and avoid plugging in high‑draw appliances.
• Cord routing: Guide cables down the back and secure them to reduce tripping hazards.
• Stability: If your table includes an anti‑tip kit, consider using it as directed, especially in busy spaces.

These habits can support safe everyday use, but results may vary depending on your layout and devices.

A few simple tweaks can help your setup look tidy and intentional.

• Plan the route: Place the table near a wall outlet so the main cord runs straight down and behind the leg.
• Use built‑in features: Some tables have shelves or open backs—coil excess cable on a lower shelf and guide lines along the frame.
• Cable helpers: Removable clips, ties, or sleeves can bundle device cords. Attach them to the rear frame or underside (if the design allows).
• Device staging: Store chargers or power banks in drawers or baskets on the lower shelf to keep surfaces clear.

Take care not to pinch cables, and keep pathways free of wires to reduce snagging or tripping.

A quick check can help narrow down the cause before you seek support.

• Test basics: Try a different cable and device, and verify the wall outlet is working.
• Inspect: Look for debris in the USB ports and make sure the table’s power plug is fully seated.
• Reduce load: Unplug non‑essential items and test one device at a time.
• Review documentation: Check the product page for the manual, warranty details, or troubleshooting notes.

If issues continue, you can contact the manufacturer listed on the item page or reach out to Walmart Customer Care for help with order support and next steps. Availability of replacement parts or repairs can vary by item.