Collision wrap is a self-adhering protective film designed to temporarily seal damaged areas on a vehicle after an accident or during repairs. It helps keep out rain, wind, dust, and debris so the interior and open body panels stay protected while the car is parked or transported.

• Common uses: Covering broken windows, door openings, or exposed panels.
• Typical features: Clear or lightly tinted, see‑thru film; widths like 18" or 36"; lengths from about 60' to 300'; some around 3 mil thick.
• Different from: Color‑change vinyl wraps and bumper/door edge protection strips, which are more decorative or permanent.

Features vary by item (e.g., UV protection, perforations, residue claims), so check each product’s details to match your needs.

Collision wrap is generally intended for parked or transported vehicles, not regular driving. If a short move is unavoidable (like repositioning or heading to a repair shop), prioritize safety and visibility.

• Keep sightlines clear: Don’t cover the windshield, front side windows, mirrors, or lights.
• Use clear film only where appropriate: Apply on non‑critical areas and confirm you have full visibility from the driver’s seat.
• Secure edges: Press down firmly so the film doesn’t flap or detach in motion.
• Know the rules: Local laws vary. When in doubt, towing or professional transport is often the safer choice.

Conditions differ by vehicle and damage. If unsure, check with your repair shop for guidance.

Crash wrap (another name for collision wrap) typically appears as a clear or blue‑tinted glossy film on a roll with a self‑adhesive backing. It’s thin, flexible, and made to conform over openings and edges.

• Form: Rolls in widths like 18" or 36" and lengths around 60', 100', or 300'.
• Convenience: Some rolls are perforated (e.g., every 36") for easier tearing and faster use.
• Performance notes: Some options advertise low or zero residue and UV protection (for a limited time window) to help resist sun exposure.

It’s distinct from carbon‑fiber‑style strips or decorative vinyl—crash wrap is a see‑thru sealing film meant for temporary vehicle protection.

Choose a roll based on the areas you need to cover and how often you’ll use it.

• 18" width: Smaller side windows, vents, mirrors, spot patches.
• 36" width: Door openings, larger glass, roof sections, bigger body panels.
• Length: Occasional DIY use may work with ~60'–100'. Shops or repeat use may prefer longer rolls like ~100'–300'.
• Features: Perforations help solo installs; see‑thru clarity supports visibility; ~3 mil thickness often balances durability and conformability.

Measure your opening and add overlap so you can wrap edges. Review each product page for exact dimensions and features. Many options are available for pickup or delivery for added convenience.

Taking a careful approach can help you get a clean seal and an easier removal.

1. Prep: Brush off loose debris around the opening and dry the area’s edges.
2. Apply: Anchor one edge, stretch gently, and smooth outward with a gloved hand or squeegee to limit wrinkles.
3. Seal: Overlap onto clean body edges and trim with scissors; avoid sensors, vents, and safety equipment.
4. Check: Press edges firmly and recheck after a few minutes for lifting.

For removal, peel slowly at a low angle. Gentle warmth (like sunlight) can help. If light residue remains, use an automotive‑safe adhesive remover and spot test first. Results can vary by surface and product, so follow the item’s instructions.