Different child door locks can help slow little escape artists while keeping adult access reasonable.

• Top-of-door latches: Mount high so kids can’t reach, but adults can.
• Lever-handle locks: Clip-on devices that block the lever from turning.
• Doorknob covers: Make round knobs harder to grip and twist.
• No-drill interior add-on locks: Provide an extra barrier without permanent holes.

Consider your door style (knob vs. lever), reach height, and who needs access (siblings, caregivers). Aim for solutions that discourage wandering without trapping anyone, and test that adults can exit quickly in an emergency. Installation varies by product, so follow the included directions and check fit regularly as your child grows.

Pick the childproofing lock that matches your handle and your routine.

• Doorknob covers: Best for round knobs; easy, tool-free setup. They reduce grip and require a squeeze-and-twist. Not compatible with lever handles.
• Lever locks: Designed for lever handles; many allow one-handed adult release and may offer stronger resistance on lever-style doors.

Think about door traffic, caregiver dexterity, and your child’s strength. If adults enter frequently, choose a design that’s simple to operate from both sides. Measure handle thickness and check compatibility notes before purchasing. Regardless of type, test for a snug fit and re-check periodically as hardware loosens or as your child gets taller and stronger.

It’s important to balance safety, access, and local rules.

• Regulations vary by location, and building/fire codes may prohibit setups that block emergency egress.
• Rather than locking a child in a room, many families use childproofing devices that slow door opening (e.g., knob covers, lever locks, or high-mounted latches) while allowing quick adult entry/exit.
• If you’re unsure, check local codes or speak with building management or a qualified professional.

Whatever you choose, avoid solutions that could trap anyone during an emergency. Test from both sides of the door, and keep supervision and broader home safety practices as part of your overall plan.

For kids who tend to wander, look for features that add a gentle layer of delay without compromising emergency exit.

• Top-of-door latches: Placed out of reach to reduce impulsive openings.
• Interior add-on locks: No-drill, removable options can add resistance on inward-swinging doors.
• Handle-specific blockers: Lever locks or knob covers matched to your hardware.

Mount devices high when possible, verify adults can release them quickly, and pair with routines like visual cues and supervised transitions. Needs vary, so consider consulting a qualified professional for personalized guidance. Reassess effectiveness as your child grows, and avoid any setup that prevents safe, rapid exit during an emergency.

Plenty of child locks install with adhesive—no holes required.

1. Clean the surface with isopropyl alcohol and let it dry.
2. Mark placement so the latch aligns squarely when the door is closed.
3. Peel the backing and press firmly for the time in the instructions.
4. Allow the adhesive to cure (often around 24 hours) before adding stress.
5. Test gently, then increase force to confirm alignment and hold.

For removal, warming the adhesive with a hair dryer and rolling it off can help minimize residue. Results can vary by paint and finish, so follow the product’s directions and spot-test in an inconspicuous area if you’re concerned about surfaces.