Choosing the right jack stand size depends on your vehicle's weight and the lift height you need.

• Check your owner's manual for your vehicle's weight and always select jack stands with a higher capacity than your car or truck.
• Consider the lift range—make sure the stands can reach the height required for your maintenance or repair task.
• For SUVs, trucks, or RVs, you may need higher-capacity or taller stands.

Always use jack stands on a flat, stable surface and never exceed their rated capacity for safety.

It's important to use jack stands only on solid, level surfaces.

• Concrete or asphalt driveways are ideal because they provide stability and prevent the stands from sinking or shifting.
• Avoid using jack stands on dirt, gravel, or uneven ground, as these surfaces can compromise safety.
• If you must work on a softer surface, consider placing a sturdy board under each stand to distribute weight more evenly.

Always double-check the stability before working under your vehicle.

For safe setup, follow these steps:

1. Park your vehicle on a flat, stable surface and engage the parking brake.
2. Lift the vehicle with a suitable jack and position the jack stands under manufacturer-recommended lift points.
3. Adjust the height and lock the stands securely using the provided mechanism, such as a pin or ratchet bar.
4. Gently lower the vehicle onto the stands and check for stability before working underneath.

Never rely solely on a jack—always use jack stands for added safety.

Proper storage helps keep your jack stands in good shape.

• Wipe off any dirt or moisture before storing to prevent rust.
• Keep them in a dry, indoor location like a garage or tool shed.
• Stack or stand them upright to save space and avoid damage.
• Inspect for wear or damage before each use, especially if they've been stored for a while.

Storing them properly can extend their lifespan and keep them ready for your next project.

Jack stands can be helpful for oil changes if you need extra clearance under your vehicle.

• They provide stable support, allowing you to work safely beneath your car or truck.
• Always use them in combination with a proper jack and never rely on the jack alone.
• Make sure the stands are rated for your vehicle's weight and are set up on a flat surface.

Using jack stands adds an extra layer of safety during routine maintenance like oil changes.