Start by measuring your wall or fence area in square feet (width × height). Then match that to panel coverage.

• Convert panel size: (width × height in inches) ÷ 144 = sq ft.
• Common examples: 10"×10" ≈ 0.69 sq ft; 20"×20" ≈ 2.78 sq ft; 24"×16" ≈ 2.67 sq ft; 40"×120" ≈ 33.3 sq ft.
• Multiply your area by overlap needed; add 10–15% for trimming.

Interlocking edges can slightly change coverage, especially around corners. If you’re between counts, having a spare panel can be helpful for patching or future touch-ups. You can check available pickup or delivery options at checkout.

Installation depends on your surface and the panel style. Here’s a simple approach:

1. Plan layout: Dry-fit panels to align the greenery for a seamless look.
2. Fence or mesh: Use zip ties through the backing grid, spacing ties every 6–8 inches.
3. Drywall or smooth walls: Mount a lightweight grid (lattice or backing board) with appropriate wall anchors, then attach panels to the grid. For temporary setups, consider removable adhesive hooks rated for the panel weight.
4. Wood surfaces: Staples or brad nails can work on the backing, avoiding visible foliage.

Always follow the product’s instructions, consider panel weight, and avoid placing near high heat sources.

Many artificial grass backdrop and boxwood panels are listed for indoor/outdoor use, and some note UV protection. Performance can vary with climate and exposure.

• Sun: UV-treated panels may help reduce fading, but direct, prolonged sun can still affect color over time.
• Rain and moisture: Plastic foliage is generally water-resistant. Secure panels so wind and water don’t loosen ties.
• Placement: Partial shade and a stable mounting surface can support longer-lasting results.
• Care: Rinse off dust or pollen periodically and check fasteners.

For specifics, compare product descriptions for UV notes, thickness, and backing style to match your outdoor needs.

Routine care can help your greenery backdrop look fresh without much effort.

1. Dusting: Use a soft brush or a vacuum with a brush attachment to lift dust gently.
2. Rinse: For outdoor setups, a light hose rinse can remove pollen and debris. Indoors, wipe with a damp microfiber cloth.
3. Spot wash: Mix mild soap with water, dab the foliage, then rinse with clean water.
4. Dry: Allow panels to air-dry before remounting or closing off airflow.

Avoid harsh chemicals, bleach, high-pressure washers, or high heat, which may affect the finish. Test any cleaning method on a small area first.

Most grass wall and boxwood hedge panels have a plastic backing grid that’s easy to customize.

1. Measure and mark: Outline the area around outlets, edges, or window frames.
2. Cut the grid: Use sharp scissors or snips to trim along the backing, avoiding foliage tugging.
3. Test fit: Dry-fit the piece and adjust for a snug seam.
4. Secure well: Add extra zip ties or clips near cut edges to prevent droop.
5. Save offcuts: Keep small pieces for patching gaps later.

Work slowly, wear gloves to protect hands, and align the leaf pattern so the transition looks natural.