Start by matching the rollers to your appliance and space.

• Weight: Check the listed load capacity and choose a set that meets or exceeds your appliance’s weight (including contents). Product pages on Walmart typically list this clearly.
• Size/Adjustability: Measure your appliance footprint and compare it to the roller or mobile base’s length/width range. Make sure doorways and corners allow the extra height and width.
• Wheels & Brakes: Rubber or soft-tread wheels can be gentler on floors; locking wheels or built‑in brakes help keep things steady once positioned.
• Floor Type: For tile or hardwood, choose smooth-rolling, non‑marring wheels; for low-pile carpet, larger diameter wheels may move more easily.
• Noise/Vibration: Some bases include multiple or twin wheels that can help distribute weight more evenly.

A few simple choices can help minimize scuffs and rattles.

• Choose softer treads: Look for rubber or polyurethane wheels marketed as non‑marring for hardwood and tile.
• Add pads: Anti‑vibration pads between the appliance feet and a mobile base can help absorb shake and dull sound.
• Lock it down: After positioning, engage brakes or wheel locks to limit movement and squeaks.
• Keep paths clean: Sweep grit and small debris before rolling to avoid scratching and wheel noise.
• Go slow: Gentle, steady movement tends to be quieter and more floor‑friendly than quick pushes.
• Check weight distribution: Make sure the load sits centered on the rollers so one wheel isn’t carrying more than it should.

Plan the move and take it slow—washers are heavy and awkward.

1. Prep the appliance: Unplug, turn off water, and disconnect hoses. Drain any remaining water if your model allows. Secure cords and hoses so they don’t snag.
2. Lift carefully: Use a lift tool or a helper to raise each side just enough to slide the adjustable base or appliance rollers underneath. Avoid tipping excessively.
3. Center and secure: Ensure the washer’s feet sit fully on the platform. Tighten any clamps and unlock wheels before moving.
4. Clear the path: Remove obstacles and protect thresholds with a thin board if needed.
5. Move slowly: Guide from the sides, not the top. Once positioned, lock the wheels. Results can vary, so consider a second person for stability.

These small casters are handy for light items like bins or countertop appliances.

1. Check weight: Verify the caster’s capacity and use them only on items within that limit. They aren’t intended for large appliances like refrigerators.
2. Clean the surface: Wipe the mounting area with a mild cleaner and let it dry. A smooth, flat surface helps adhesion.
3. Plan placement: Mark positions near the corners for stability and even weight distribution.
4. Stick and press: Peel the backing, align carefully, and press firmly for several seconds.
5. Cure time: Allow the adhesive to set per the product instructions before loading weight; longer cure times can improve bond strength.
6. Test gently: Roll slowly the first time and watch for any lifting.

Each tool shines in different situations.

• Furniture dolly: Useful for transporting bulky items across rooms or longer distances. The larger platform and swivel casters can make turns easier. Straps (when used per instructions) can add stability during moves. It’s a good option when you don’t need the item to stay mobile afterward.
• Appliance rollers/mobile base: Helpful for day‑to‑day access—like sliding a washer out for cleaning and then locking it in place. Adjustable bases can add a bit of height and may include brakes for parking.

If stairs or very tight spaces are involved, consider professional help. Always compare load ratings and follow the product’s safety guidance on Walmart before choosing.