Two-Post Battery Disconnect Kill Switch Kit
Two-Post Battery Disconnect Kill Switch Kit
Hero image 0 of Two-Post Battery Disconnect Kill Switch Kit, 0 of 5

Two-Post Battery Disconnect Kill Switch Kit

(No ratings yet)

Key item features

  • Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications
  • Rated 180 amp continuous, 1000 amp instantaneous. Battery shut off switch can be installed in panels up to 3/16" thick
  • Features two 3/8" copper terminal battery cable studs which ensure a positive electrical connection

Specs

Manufacturer part number, 9102708Vehicle fitment type, SpecificBrand, Speedway MotorsAssembled product weight, 2 lbAccessories, Includes Mounting Bracket and HardwareColor, Red

About this item

Product details

BATTERY DISCONNECT SWITCH Can be used as a car battery kill switch, battery isolation, and more. Applications include race cars, show cars, seasonal vehicles, campers, etc. 3/8-inch copper studs with brass hardware for highest conductivity. Uses 3/4-inch mounting hole and fits panels up to 3/16-inch thick. Positive locking detent switch with labelled on/off high visibility red handle. Used in racing, kit car building, or any vehicle you wish to isolate the battery from. Shuts down all electrical systems when used as an emergency disconnect. Prevents battery drain from parasitic loss when used as an isolation switch. Supports 1,000 amps instantaneous and 180 amps continuous. Protect Your Ride with An Easy to Install Battery Disconnect Switch Our two-post battery disconnect switch is the perfect solution for quick and easy separation of your vehicle’s battery from the rest of the electrical system. With one quick rotation of the easily spotted red safety lever the battery cutoff switch does its job of isolating the battery from every circuit in the vehicle. This is exactly what track safety officials are looking for on any race car in any racing sanctioning body (read your rule book to determine best mounting location). While popular for racing use as a car battery kill switch, our two-post disconnect switch can be used for any road going vehicle as a security measure. Mount the switch in a secure location like your trunk and turn the battery switch off when you leave your ride unattended. Now your vehicle is completely “dead”, and they can’t start it. From kit cars and replica builds to rat rods and more, it is the perfect answer, and you may even be eligible for an insurance discount! These switches are perfect for isolating your battery from anything that can drain it during long term storage (EFI systems, car audio, and more) and are popular in applications with multiple batteries, making it perfect as a RV battery disconnect switch. Should A Battery Disconnect Be on Positive or Negative? The answer lies in your racing sanctioning body’s rule book as to whether the battery disconnect should break the positive or negative battery cable. Our choice will always be the battery switch breaking the negative cable for street use, but obviously you must go by what your racing body states how they want it wired. For example, the NHRA wants the battery shut off switch mounted at the rear of the vehicle for external access by track safety crew and break the positive cable. So be sure to follow your rule book if you’re using this two-post switch in a race vehicle. For vehicles with alternator charging systems, or sensitive electronics that can be damaged by breaking the battery to vehicle electrical systems with the car running, we recommend our four-post battery disconnect that provides a safe way to wire in your vehicle’s charging system while still using a battery disconnect device effectively. Installation requires a single 3/4-inch hole in your dash panel or other suitable location up to 3/16-inch thick. For roll bar or custom installation, we do offer an 11-gauge battery cut off switch mounting bracket that can be welded, riveted, or bolted to your vehicle’s structure. The solid copper 3/8-inch electrical terminals on our battery shut off switch accept standard 3/8-inch ID battery cable terminals. We offer 2-gauge terminals and 1/0-gauge terminals to build your battery cables and connect your battery isolation switch into your electrical system. We also highly recommend covering the completed connections with a pair of terminal boots for additional security. SWITCH BRACKET This bracket makes it simple to mount your battery disconnect switch in a location of your choosing. The steel L-shaped bracket features bolt holes for easy mounting to a flat surface, but it can also be trimmed to a desired angle and welded to a cage or other location of your choosing. Simplifies custom mounting of a battery disconnect switch
  • Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications
  • Rated 180 amp continuous, 1000 amp instantaneous. Battery shut off switch can be installed in panels up to 3/16" thick
  • Features two 3/8" copper terminal battery cable studs which ensure a positive electrical connection
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Manufacturer part number

9102708

Vehicle fitment type

Specific

Brand

Speedway Motors

Assembled product weight

2 lb

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $67.99$67.99/count
Price when purchased online
  • Free Holiday returns until Jan 31

How do you want your item?

How do you want your item?
Ships to
Arrives between Nov 24 - Nov 30
|
Shipping fee $13.99
Sold and shipped by Speedway Motors, INC
4.460199004975125 out of 5 stars
4.5 stars out of 5, based on 402 seller reviews(4.5)
Extended holiday returns
Free Holiday returns until Jan 31