

Hero image 0 of Royer R-121 Ribbon Microphone & dBooster Combo, 0 of 5
Royer R-121 Ribbon Microphone & dBooster Combo
(No ratings yet)
Key item features
- Royer R-121 Ribbon Microphone
High SPL Capabilities
No internal active electronics to overload or produce distortion up to maximum SPL rating
Extremely low residual noise
Ribbon element is not affected by heat or humidity
Absence of high-frequency phase distortion
Equal sensitivity from front or back of element
Consistent frequency response regardless of distance
Royer dBooster In-Line Signal Booster
Safe for use on all ribbon mics
Increases headroom at the preamp
Provides true electrical isolation
Protects ribbon mics from phantom-power
Minimizes mic loading
12dB and 20dB gain stages
High input impedance
Low output impedance
Rugged case construction
Ultra-low noise performance
Ultra-low distortion
Wide frequency bandwidth - See product details
- Quality construction
Specs
Microphone type, Microphone
Mic tech, Ribbon
Microphone polar pattern, Figure-8
Brand, Royer
Connection, XLR
Accessories, Royer R-121 Ribbon Microphone, Royer dBooster In-Line Signal Booster
Microphone type
Microphone
Mic tech, Ribbon
Mic tech
Ribbon
Microphone polar pattern, Figure-8
Microphone polar pattern
Figure-8
Brand, Royer
Brand
Royer
Connection, XLR
Connection
XLR
Accessories, Royer R-121 Ribbon Microphone, Royer dBooster In-Line Signal Booster
Accessories
Royer R-121 Ribbon Microphone, Royer dBooster In-Line Signal Booster
About this item
Product details
The Royer R-121 Ribbon Microphone & dBooster Combo comes with a great mic and what you need to boost its signal without adding noise. Here's what you get:
Royer R-121 Ribbon Microphone
The R-121 is Royer's flagship microphone and the world's first radically redesigned ribbon microphone. Royer did away with the large, heavy, fragile, "classic" approach to ribbon microphones and went in a completely new direction. The R-121 gives all of the warm, natural tonal response for which top engineers have always loved ribbon mics, but in a compact, lightweight, higher output, tough-as-nails package that was unheard of in a ribbon mic before the Royer R-121.
Like many of the best-loved classic ribbon mics, the R-121 has a figure-8 pattern, sensitivity in the dynamic mic range, and a warm, realistic tone and flat frequency response. But that's where the similarities end. By using advanced materials and a blend of cutting edge and old-school hand-build construction techniques, the R-121 is a far more versatile and user-friendly ribbon mic that can stand up to the most demanding tasks, including live stage use. It's built solid enough for Royer to give it a lifetime warranty. The R-121 redefined ribbon microphones so thoroughly that Recording magazine wrote "...the Royer R-121 is destined to become one of the classic microphones of the 21st century".
Patented Offset Ribbon Technology
The R-121's proprietary offset ribbon transducer (Patent Number: 6,434,252) is the first of its kind, positioning the ribbon element closer to the front (logo) side of the microphone. This arrangement gives the ribbon more room to move within the prime magnetic field while maintaining full frequency response during high SPL recordings. It's an integral piece of the magic of all Royer R-series microphones.
Recording With The R-121
Tonally, the Royer R-121 microphone hears things the way your ears hear them. Most microphones add their own characteristics to your recordings; some have a hyped high- and low-end response with scooped out mids; some are super sizzly in the highs; some accent midrange and give very little upper- and lower-end frequency response; and some respond to nothing but low end. They all serve a purpose and have their place in recording and live work. But if you've ever heard something brilliant ” an unbelievable electric guitar, an inspiring trumpet, a sweet flute, an amazing kit ” and found that getting that sound to tape or hard drive was impossible, you owe it to yourself to try a Royer ribbon. The R-121's response is flat and well balanced; low end is deep and full without being boomy; mids are well defined and realistic; and the high-end response is sweet and natural sounding, never edgy or sibilant.
On playback you'll find the sound is natural and alive, with a panoramic, ambient feel much like what you heard when you were standing in the room with the instruments(s) you were recording.
Recording LOUD
Need to record at insane levels? No problem! The R-121's maximum SPL rating is 135dB at 20Hz and it can handle that for years. In practical terms, that means you can put your R-121 directly in front of a souped up 100-watt Marshall and open it up without microphone distortion or damage to the ribbon. Royer doesn't recommend trying this with other ribbon mics, but the R-121 was built to take it.
Two Mics In One
At distances of three feet and closer, the back of the Royer R-121 records slightly brighter than the front side. This can be extremely useful when recording acoustic guitars, vocals, and other sound sources that you may need a slightly brighter response on.
Royer dBooster In-Line Signal Booster
Royer R-121 Ribbon Microphone
The R-121 is Royer's flagship microphone and the world's first radically redesigned ribbon microphone. Royer did away with the large, heavy, fragile, "classic" approach to ribbon microphones and went in a completely new direction. The R-121 gives all of the warm, natural tonal response for which top engineers have always loved ribbon mics, but in a compact, lightweight, higher output, tough-as-nails package that was unheard of in a ribbon mic before the Royer R-121.
Like many of the best-loved classic ribbon mics, the R-121 has a figure-8 pattern, sensitivity in the dynamic mic range, and a warm, realistic tone and flat frequency response. But that's where the similarities end. By using advanced materials and a blend of cutting edge and old-school hand-build construction techniques, the R-121 is a far more versatile and user-friendly ribbon mic that can stand up to the most demanding tasks, including live stage use. It's built solid enough for Royer to give it a lifetime warranty. The R-121 redefined ribbon microphones so thoroughly that Recording magazine wrote "...the Royer R-121 is destined to become one of the classic microphones of the 21st century".
Patented Offset Ribbon Technology
The R-121's proprietary offset ribbon transducer (Patent Number: 6,434,252) is the first of its kind, positioning the ribbon element closer to the front (logo) side of the microphone. This arrangement gives the ribbon more room to move within the prime magnetic field while maintaining full frequency response during high SPL recordings. It's an integral piece of the magic of all Royer R-series microphones.
Recording With The R-121
Tonally, the Royer R-121 microphone hears things the way your ears hear them. Most microphones add their own characteristics to your recordings; some have a hyped high- and low-end response with scooped out mids; some are super sizzly in the highs; some accent midrange and give very little upper- and lower-end frequency response; and some respond to nothing but low end. They all serve a purpose and have their place in recording and live work. But if you've ever heard something brilliant ” an unbelievable electric guitar, an inspiring trumpet, a sweet flute, an amazing kit ” and found that getting that sound to tape or hard drive was impossible, you owe it to yourself to try a Royer ribbon. The R-121's response is flat and well balanced; low end is deep and full without being boomy; mids are well defined and realistic; and the high-end response is sweet and natural sounding, never edgy or sibilant.
On playback you'll find the sound is natural and alive, with a panoramic, ambient feel much like what you heard when you were standing in the room with the instruments(s) you were recording.
Recording LOUD
Need to record at insane levels? No problem! The R-121's maximum SPL rating is 135dB at 20Hz and it can handle that for years. In practical terms, that means you can put your R-121 directly in front of a souped up 100-watt Marshall and open it up without microphone distortion or damage to the ribbon. Royer doesn't recommend trying this with other ribbon mics, but the R-121 was built to take it.
Two Mics In One
At distances of three feet and closer, the back of the Royer R-121 records slightly brighter than the front side. This can be extremely useful when recording acoustic guitars, vocals, and other sound sources that you may need a slightly brighter response on.
Royer dBooster In-Line Signal Booster
The Royer model R-DB20 is a phantom-powered ribbon and dynamic microphone signal booster and impedance buffer. It increases the level of passive low-output ribbon and dynamic microphones with a minimum of distortion or coloration. Designed for professional applications, the dBooster provides two levels of clean gain boost; 12dB and 20dB, selectable by a front panel switch. The dBooster maintains headroom and gain regardless of load. The Class A input circuitry presents a high source impedance to the microphone, which minimizes loading (damping). This reduces coloration and distortion while at the same time improving headroom. By utilizing the 12/20dB gain switch, optimum balance between gain and headroom can be achieved for a variety of uses. The low-impedance output of the dBooster is an increased microphone-level signal that can drive a digital interface directly or a standard microphone preamplifier. It also minimizes signal loss on long cable runs.
- Royer R-121 Ribbon Microphone
High SPL Capabilities
No internal active electronics to overload or produce distortion up to maximum SPL rating
Extremely low residual noise
Ribbon element is not affected by heat or humidity
Absence of high-frequency phase distortion
Equal sensitivity from front or back of element
Consistent frequency response regardless of distance
Royer dBooster In-Line Signal Booster
Safe for use on all ribbon mics
Increases headroom at the preamp
Provides true electrical isolation
Protects ribbon mics from phantom-power
Minimizes mic loading
12dB and 20dB gain stages
High input impedance
Low output impedance
Rugged case construction
Ultra-low noise performance
Ultra-low distortion
Wide frequency bandwidth - See product details
- Quality construction
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Specifications
Microphone type
Microphone
Mic tech
Ribbon
Microphone polar pattern
Figure-8
Brand
Royer
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Customer ratings & reviews
0 out of 5 stars
This item does not have any reviews yet
Current price is USD$1,698.00
Price when purchased online
- Free shipping
Free Holiday returns until Jan 31
Walmart Protection Plan by Allstate
(Only one option can be selected at a time)
How do you want your item?
Ships to
Arrives by Mon, Nov 23
|Sold and shipped by Musician's Friend
4.626640738940204 out of 5 stars
Extended holiday returns
Free Holiday returns until Jan 31